The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   Spare tire and Jack placement (https://67-72chevytrucks.com/vboard/showthread.php?t=524145)

mark '87 930 05-11-2012 02:34 PM

Spare tire and Jack placement
 
MY truck came with a 'spare' which is just sitting in the bed. I'm ok wiht that for now, but will likely get an underframe bracket to mount it underneath so i can use the entire bed..

That said, I looked everywhere on the truck and can't find a jack anywhere! There obviously needs to be one.. where would it be? or where can i buy an 'orginial' and where would it mount?

oldcouple 05-11-2012 04:40 PM

Re: Spare tire and Jack placement
 
This truck? http://67-72chevytrucks.com/vboard/s...d.php?t=496515, if so the stock jack is a funky sorta bottle jack that was really a screw that mounted with a spring behind the driver side seat.

mark '87 930 05-11-2012 04:45 PM

Re: Spare tire and Jack placement
 
Yes, sorry. It's a '56 3100. If anyone has pictures of what it looks like. And where I can get it, would be appreciated.

I was thinking that's where it went (behind the drivers seat)
Posted via Mobile Device

oldcouple 05-11-2012 04:46 PM

Re: Spare tire and Jack placement
 
http://www.ebay.com/itm/55-56-57-58-...sories&vxp=mtr Note, they were none too safe, I remember my dads slipping off or sinking into the mud everytime he used it.

mr48chev 05-11-2012 05:14 PM

Re: Spare tire and Jack placement
 
That should be the correct jack, they fit a lot of years and usually work pretty well.

A small hydraulic bottle jack works pretty well though but you want one that can get under the front axle with a flat tire.
On my 48 I carried two jacks. One to stick under the end of the frame rail to lift the truck up enough to get the short one under the axle. Having a hot rod truck rather than a restored truck I never worry about having the "correct" anything though.

When you go to wrecking yards just start looking under the hoods and under the seats and behind the seats of mid 70 and earlier trucks and you might run across a jack and the handle.

mark '87 930 05-11-2012 05:44 PM

Re: Spare tire and Jack placement
 
Thanks everyone. Exactly what I was looking for.
Posted via Mobile Device

_Ogre 05-11-2012 07:11 PM

Re: Spare tire and Jack placement
 
as i remember they only fit under the axle with good tires on it.
flat tire? nope

Chevette 05-11-2012 11:26 PM

Re: Spare tire and Jack placement
 
Or, you could "place" them in your garage and go with "run flats".

G&R's57GMC 05-12-2012 12:09 AM

Re: Spare tire and Jack placement
 
Or carry a spare tire and call AAA :)

mark '87 930 05-12-2012 06:55 AM

Re: Spare tire and Jack placement
 
I thought triple AAA whilst carrying my spare was great, except that i don't like waiting.. and changing a spare is easy and quick. The fact that the jack doesn't fit under the axle with a flat is a concern though as that's the only reason i would use it. Run flats are a great idea, ii guess i'd have to change my tires for that.

I guess the other option os to carry a can or two of that tire inflate stuff..Anyone use that?

_Ogre 05-12-2012 07:18 PM

Re: Spare tire and Jack placement
 
i'd get a nice little scissors jack out of a newer truck, should go high enough

G&R's57GMC 05-12-2012 08:10 PM

Re: Spare tire and Jack placement
 
1 Attachment(s)
98 Tahoe has a great jack kit !

Packaged in a flat box is the Jack shaft sections, in the bag is the Jack crank handle .

This set will allow you to slide the jack under the axle with the shaft sections and retrieve it also.

You can pick one up from the wrecking yard.

This is my solution for my SSR's lack of a spare.

Now that I think about it I should get a set for each of my Classic Trucks.

mr48chev 05-13-2012 12:02 PM

Re: Spare tire and Jack placement
 
I picked up one of the stock jacks with handle at the local annual "yard sale" at the trade school across from work for 5.00 yesterday.

They will fit under most trucks that haven't been lowered when you have a flat. I'm not sure what this one is gong in but it will be used in one of my trucks.

oldcouple 05-14-2012 11:19 AM

Re: Spare tire and Jack placement
 
Lot of choices here as well, I have one that fits in a case, I use it when I am towing the trailer, can be switched back and forth. http://www.harborfreight.com/automot...oor-jacks.html

Hogsophist 05-14-2012 01:27 PM

Re: Spare tire and Jack placement
 
I'm switching the gas tank on my 57 to a rear, underbed style. I'm also removing the side mount spare (i know, blasphemy), so is the only option just putting a spare in the bed?

probably a silly question, but i'm a very new addict and owner :)

oldcouple 05-14-2012 05:14 PM

Re: Spare tire and Jack placement
 
I have spacesaver doughnut tire, correct bolt pattern, I THINK it will fit behind the passenger seat, but first I have to put the seat in.

mark '87 930 05-15-2012 09:58 AM

Re: Spare tire and Jack placement
 
Thanks everyone for the info, I ended up finding one (original style) from fleabay and will see how that works once it comes in..

Russell Ashley 05-15-2012 10:35 AM

Re: Spare tire and Jack placement
 
1 Attachment(s)
Not to hijack the thread, but since it's about a TF jack, does this look like the correct jack for a 57? If so, does anyone have a pic of the correct handle that would be used?

OrrieG 05-15-2012 04:15 PM

Re: Spare tire and Jack placement
 
I use a high lift, but then I am usually lifting mine out of a ditch, hole or off a rock. You can also use them as a come along or to separate stuff, like a crushed roof or door at a wreck.

_Ogre 05-15-2012 09:27 PM

Re: Spare tire and Jack placement
 
Quote:

Originally Posted by Russell Ashley (Post 5381710)
Not to hijack the thread, but since it's about a TF jack, does this look like the correct jack for a 57? If so, does anyone have a pic of the correct handle that would be used?

that looks like the correct jack and bracket
i believe the lug wrench was the handle
you had to be tough to change a tire on any old truck
belly crawl under the truck to set the jack
and then jack it up with half your body under the truck

mark '87 930 05-29-2012 10:23 AM

Re: Spare tire and Jack placement
 
Does anyone have pictures of where the jack geos.. and more specifically, that 'bar' you use to turn the jack with? I figured out how to 'secure' :) the jack in place with that spring, but i got another longer spring and some holders for what seems to be that bar that folds in two.

Pictures would be awesome.

_Ogre 05-29-2012 09:08 PM

Re: Spare tire and Jack placement
 
russell ashley: i misspoke, that is not a period correct jack for a 55-59
the correct jack has a screw on the bottom that you turn

http://www.bobbittville.com/ChevyTru...Jack_after.jpg

Russell Ashley 05-30-2012 08:08 AM

Re: Spare tire and Jack placement
 
Quote:

Originally Posted by _Ogre (Post 5406764)
russell ashley: i misspoke, that is not a period correct jack for a 55-59
the correct jack has a screw on the bottom that you turn

http://www.bobbittville.com/ChevyTru...Jack_after.jpg

I wondered about that after I saw some of the other pics of original jacks. I had to remove it to install the seatbelts so I wasn't going to use it anyway. It did fit the bracket like it was correct for it though. I'm going to get a jack from a late model Chevy van, which comes in a plastic case, and mount that under the seat when I ever start driving the truck.

mark '87 930 06-01-2012 05:36 PM

Re: Spare tire and Jack placement
 
no one's got interior pictures? really?


All times are GMT -4. The time now is 09:29 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com