sport bumper
 

Hey guys, ran into a snag installing my rear sport bumper, I was wondering what size the bolts are that hold the brackets to the frame, I think I installed 1/2 inch, but the brackets are to high , so I am thinking if I installed 7/16, then this would allow me to adjust the hight of the bracket in relationship to the frame and the tailgate reveal. I tried to install, and the bumper would hit the gate if down in the open position, it appears to be about 1/4 to 1/2 to highThanks Rob

Re: sport bumper
 

This is classified section

Re: sport bumper
 

sorry wrong section, and thanks to mgross post on bumper, found the problem right away, wrong front hole, mounted it in the slotted hole rather than the one above,...six years is too long to remember lol!