The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Vent Window Seal Question-Part II (https://67-72chevytrucks.com/vboard/showthread.php?t=52739)

69sixpackbee

05-14-2003 01:16 PM

Vent Window Seal Question-Part II

For those of you who responded to my earlier post and also for those who wish to chime in, when replacing the division bar channel insert and the vent window seals did you rivet through BOTH the side seal and the div. bar insert or just the vertical vent window seal itself and glue the bar insert?
Thanx!

JimKshortstep4x4

05-14-2003 01:43 PM

We always glue the felt strip into the division bar. We use 3M Trim
Adhesive.

Jim

71elect

05-14-2003 07:20 PM

When I changed mine out this past winter, I just riveted the vent seals back into place and used some trim adhesive to hold the division bar channel insert in place.

69sixpackbee

05-14-2003 07:25 PM

Thanx guys!

All times are GMT -4. The time now is 05:57 AM.