The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   WIW (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=83)
-   -   67 cst parts (https://67-72chevytrucks.com/vboard/showthread.php?t=527737)

dan s 06-03-2012 06:42 PM

67 cst parts
 
4 Attachment(s)
I just picked up a 67 cst. I am trying to price some parts. I need values for , trim pieces, grill , etc. It also has a good looking speedwarning dash, Is $350 ok to ask ? most of the body is pretty rotten. frame looks pretty good. rear diff is a posi according to the spid. Thanks in advance for any help. Dan

VA72C10 06-03-2012 07:01 PM

Re: 67 cst parts
 
need pictures of everything for good #'s

did you test the s/w? Wiring and buzzer with it? Tach or no?

I just bought one for 350 shipped fully restored with wiring/buzzer, and a new bezel...I bought an untested one for160 shipped. they actually part out for more than together unless restored...

trim depends on condition
lwb or swb frame?
find the gear ratio for the posi. 6 lug posi normally sell around 200-250 but have seen them sell cheaper and higher...

dan s 06-03-2012 07:05 PM

Re: 67 cst parts
 
Not tested yet, no tach. lwb . will spid tell ratio ? Thanks

VA72C10 06-03-2012 07:39 PM

Re: 67 cst parts
 
definitely test the s/w if you can....huge difference in value...untested I'd say 175-200 since it's really clean and looks complete (if wiring is good) tested maybe 300-325.

is grill rusty like the hood? If not, 150-200.

the 67 specific parts like ignition bezel, e-brake, seatbelts, door handles (exterior) are worth more than comparable 68-72 parts....

dan s 06-03-2012 07:44 PM

Re: 67 cst parts
 
Grill has some surface rust, I didn't notice any rot. I also have a much nicer hood in the back of the truck. THANKS for the help!

michael bustamante 06-05-2012 07:03 PM

Re: 67 cst parts
 
did you notice the knobs are 68 and up? too bad. that dash cluster is 67 though as is the glovebox door

starvinartis 06-09-2012 04:05 PM

Re: 67 cst parts
 
Michael how can you tell the cluster is 67 and not 68? I'm restoring a 67 that's missing the cover so need to know what I'm looking for. Thanks

starvinartis 06-09-2012 04:06 PM

Re: 67 cst parts
 
Gosh she sure is straight for being a rust bucket! Whatta shame


All times are GMT -4. The time now is 03:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com