The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   starter noise (https://67-72chevytrucks.com/vboard/showthread.php?t=528660)

SRVBLUES64 06-09-2012 11:27 PM

starter noise
 
when I start my truck the starter which is new make a gear missing clang loud noise and sometime wont even start any thougths? 350 350t 66 c10

MikeS. 06-09-2012 11:33 PM

Re: starter noise
 
Bad flywheel? We had an AMC car that sounded/acted like that and it was the flywheel.

Were you having problems earlier?

cb1965 06-09-2012 11:46 PM

Re: starter noise
 
X2 on bad flywheel, maybe its missing some teeth :sexy:. just an idea, rotate the engine using the balancer bolt then try and start it.

SRVBLUES64 06-09-2012 11:46 PM

Re: starter noise
 
Mike, I have not even driven it 2 miles it was fine when the 170 dollar starter was installed I messed with the timing cause it was acting up and then the starter started making this crazy noise

chopper john 06-09-2012 11:48 PM

Re: starter noise
 
if the teeth are ok. shim it

MikeS. 06-09-2012 11:49 PM

Re: starter noise
 
OP, your last post was # 357, my favorite caliber. :)

I'm definetely no mechanic, I'm a part replacer once I'm told what part to replace, sooo I don't know. Good luck.

SRVBLUES64 06-09-2012 11:50 PM

Re: starter noise
 
Ill crawl under it tomorrow and see whats up, Im hoping shims

losthope 06-10-2012 12:24 AM

Re: starter noise
 
I had a starter on a 350 do the same thing and I just went to the autoparts store picked up some shims and shimmed it,Make sure you know what style bolt pattern you have on the starter so you buy the right style shims the first time(staggered, or straight shims)...usually you'll get three or four shims that are different thicknesses, start with the smallest size and then add the thicker ones as needed...Sometimes youll never have to shim a starter the whole time you own the motor but sometimes for some reason theres one that you will..good luck.

SRVBLUES64 06-10-2012 03:05 PM

Re: starter noise
 
first of all thanks for all the tech help. I did get it fixed I had a buddy come over and we found that the mini starter that was install by the mechanic about 3 months ago the starter somehow was missing hitting the flywheel most of the time and started chewing the teeth up, this was a 170 dollar starter it worked which we dont know how. So we changed to a standard starter and it works great and its engaging the flywheel like it should Thanks again


All times are GMT -4. The time now is 05:57 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com