Rear end change for '64 C 10
 

I am preparing to drive from California to Louisiana and want to take my truck, but as it is now it is not fit for freeway driving. I've heard that there is a rear end off a Chevelle that will make my original four speed with compound low something closer to a true four speed. Can anyone give me any hints as to the exact model I should be looking for? What will have to go into making the changes? My truck is a two-wheel drive Fleetside with the long bed and the original 235 straight six. I want to change as little as possible. Thanks!!!

never heard of a chevelle rearend being used..... you want 100% bolt on? look for a rearend from a 64-70 chevy with 3:07s.... should be able to cruze at 70-80 fine

------------------
My Truck pictures

www.xframeimpala.com

68 4x4 short fleetside 327 CH465 edelbrock intake and carb MSD distributor its the "SHAGROLET"
56 big window short stepside 235 dual 1 brls
64ImpalaSS 327
70 C10 LWB fleetside custom/10 350/TH350
IM me on aol SN= SHAGROLET

I have a 64' and I put a 72 model 3.07 in it. Direct bolt on. But I had to use the 72's track arm because on the 64, the track arm is mounted on a bracket that is welded to the rear end. On the 72, the track arm is mounted to directly to the rear end housing.

Where you headed in La? I'm in Lafayette. (South La.)

------------------