The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)
-   -   No 4x4 on my 99' Z71 (https://67-72chevytrucks.com/vboard/showthread.php?t=529591)

widewhite70 06-16-2012 09:56 AM

No 4x4 on my 99' Z71
 
Ok this could've been asked somewhere in here already but I've got a 99' silverado 1/2 ton 4x4, I've replaced the 4x4 actuator in the front diff and the switch inside the cab. It now makes the noise like it's locking in but I still don't get 4x4. The auto 4x4 will work when I go to use the and the transfer case goes into low 4x4 when I hit it button but I don't get any front axel out of it. Anyone have any suggestions?

bbchevy 08-27-2012 09:45 PM

Re: No 4x4 on my 99' Z71
 
The wiring going from the transfer case to the front axle didn't get bit by the front drive shaft did it? I had a wiring problem from that on one once.
Posted via Mobile Device

widewhite70 08-28-2012 01:47 PM

Re: No 4x4 on my 99' Z71
 
Thanks! No I never checked that but as soon as I get the chance I will


All times are GMT -4. The time now is 08:31 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com