The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)

- - Attaching Sway bar to CPP control arms (https://67-72chevytrucks.com/vboard/showthread.php?t=530164)

CigarMan

06-19-2012 09:27 PM

Attaching Sway bar to CPP control arms

Well I have a nice 1 1/4 bar that will not mount to single hole lower arm. Any ideas on how a can make this work without buying CPP sway bar?

Thanks
Posted via Mobile Device

CigarMan

06-20-2012 03:58 PM

Re: Attaching Sway bar to CPP control arms

No one has any idea on this? I noticed that the cpp sway bar is flattened on the end which is where they drilled single hole for mounting to sway bar. Maybe I can just drill hole throught this bar..
Posted via Mobile Device

vin63

06-20-2012 04:31 PM

Re: Attaching Sway bar to CPP control arms

You'll have to either fabricate and weld a tab to the LCAs for the bushing mount, or (and I would recommend this) run the newer style sway bar.

All times are GMT -4. The time now is 12:37 PM.