The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   What gear ratio? (https://67-72chevytrucks.com/vboard/showthread.php?t=530852)

x ReAcT x 06-24-2012 04:12 PM

What gear ratio?
 
I have an 86 pickup that im putting 33in. tires with a 4 inch lift. Currently running 3.43 gears but im putting an auburn locker in. Should i go with 3.73 or stick with the 3.43? I have a ramjet 350 matted to a sm### (forgot the numbers) its the 3 speed with the granny gear.

x ReAcT x 06-24-2012 04:47 PM

Re: What gear ratio?
 
Correction: Its actaully the 4 speed but i call it a 3 because the granny gear is pretty useless unless your towing.

gGMC DOG 06-24-2012 06:59 PM

Re: What gear ratio?
 
go with 3.73

86c20 06-24-2012 07:01 PM

Re: What gear ratio?
 
i have the 3.42 gears and love it. i have stock tires tho but it i would guess i would say that it would feel like 3.23 on your truck

x ReAcT x 06-24-2012 07:39 PM

Re: What gear ratio?
 
Would going with 3.73 help fuel economy any?

JPalmer81 06-25-2012 08:42 AM

Re: What gear ratio?
 
Your tranny is the sm465, and the 3.73 would hurt your fuel economy. I don't think putting the 33" tires is going to hurt you much, your "new" ratio if you leave the rear end how it is will be 3.22 with 33" tires, putting it to 3.73 would correct the gearing you lost from the tire swap though.....but with the 33" tires it would be like an over-drive, not quite as good, but would help your final drive ratio for going down the highway

x ReAcT x 06-25-2012 09:09 PM

Re: What gear ratio?
 
I definitely appreciate the input im going with an auburn locker 3.42 ratio.

3r!c84 06-26-2012 03:38 AM

Re: What gear ratio?
 
remember when changing gear ratio on 4x4 trucks. you need to do both front and back same gear ratio . fyi.

Heavy87Chevy 06-26-2012 10:11 AM

Re: What gear ratio?
 
Quote:

Originally Posted by x ReAcT x (Post 5454437)
I definitely appreciate the input im going with an auburn locker 3.42 ratio.

I put the same locker in my rear end about a year ago & its been good.. I was considering going 3.73 as well but when I factored in changing the front & the rear it started getting expensive, for me anyway as I didn't do it myself.. I'm running 33s too & gas mileage isnt too bad, but I've got overdrive & a 700r4 trans


All times are GMT -4. The time now is 04:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com