WTB: Bumper Bolts | 69-70 grill
 

Looking for bumper bolts for front and rear sport bumpers. Also needing a straight grill.

Thank you!
Joey

Re: WTB: Bumper Bolts | 69-70 grill
 

i have a really nice 69-70 grille.1 small dent next to pass headlight. just needs a good polish to bring it back. I am looking for $130 plus shipping for it(usually about $100 or so) just sent one to texas not to long ago.

http://img.photobucket.com/albums/v3...rtsfs001-1.jpg
http://img.photobucket.com/albums/v3...rtsfs002-1.jpg
http://img.photobucket.com/albums/v3...rtsfs003-2.jpg

Re: WTB: Bumper Bolts | 69-70 grill
 

I have a new set of front & rear bumper bolts. $20 shipped.

Re: WTB: Bumper Bolts | 69-70 grill
 

I think I am going to pass on the grill for now but I will take the bolts. Are those the bigger style that fit the holes to the frame horn?

Re: WTB: Bumper Bolts | 69-70 grill
 

Are you needing the grill and insert or just the insert? I have a retry nice insert for sale...
Posted via Mobile Device

Re: WTB: Bumper Bolts | 69-70 grill
 

I need what is posted above. Hopefully with most/all paint on it.

Re: WTB: Bumper Bolts | 69-70 grill
 

Also Wide- Thursday is fine on the the bezels.

Re: WTB: Bumper Bolts | 69-70 grill
 

The bolts measure 1 & 1/2 inches from end to cap. It seems that that they are the smaller ones. I just compared them to my NOS set and the NOS set are 2 inches long from end to cap.

Re: WTB: Bumper Bolts | 69-70 grill
 

Are they the same diameter? Would the 1.5 inch work? Thank you.

Wideside- Do you have pictures of the insert?

Re: WTB: Bumper Bolts | 69-70 grill
 

Are you installing an aftermarket or OEM set of bumpers? I will double check how they install. I will install my bumper with them without tightening them down.

Re: WTB: Bumper Bolts | 69-70 grill
 

I am using GoodMark repop bumpers. If they snug down I will take them.

Re: WTB: Bumper Bolts | 69-70 grill
 

I have a whole bucket of bolts from trucks I have parted out, but they are all front bumper bolts. They are used and you would have to tell me how many you need and length, size, etc. I could give you a price at that time. They are all oem but would need polishing.

Re: WTB: Bumper Bolts | 69-70 grill
 

I just checked, they snug down fine. The OEM bolts have a thead diameter of 8/16" (1/2"), and the afftermarket ones have a have a thead size of 7/16. I had no problem installing the bumper. Let me know if you are still interested.

Re: WTB: Bumper Bolts | 69-70 grill
 

Re: WTB: Bumper Bolts | 69-70 grill
 

Good deal IMO. !

Re: WTB: Bumper Bolts | 69-70 grill
 

Has anyone heard from this guy. I sent out a restored console against my better judgment with only the deposit payed. I went ahead and shipped in good faith and empathetic to the fact that it did take a while to get it done. I have not heard back via email or site wise either.

Re: WTB: Bumper Bolts | 69-70 grill
 

I bent a bumper bolt getting my old bumper off. I am also missing the the hardware to bolt up one of the sport bumper brackets to the frame. Do you still have some bolts from trucks you've parted?

Re: WTB: Bumper Bolts | 69-70 grill
 

Sorry, no. I was actually scrounging for the carriage head stainless aloes bolts for my latest buil this afternoon. I went to Tractor Supply and bought the 1/2" bracket to frame bolts washers and nuts. Grade 8 gold irradiated were less than $10 for front and rear.
Posted via Mobile Device

Re: WTB: Bumper Bolts | 69-70 grill
 

Ironic that heavymetal was looking for someone as he left a few people here out to dry himself!
Posted via Mobile Device