The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - BB pwr steering cannister... (https://67-72chevytrucks.com/vboard/showthread.php?t=531725)

Tom Vogel

06-30-2012 09:11 AM

BB pwr steering cannister...

Does anyone have a picture of exactly where the Big Block remote power steering cannister mounts on the fender. Maybe with measurements for drilling the holes? Im at that point and could sure use the help. Did a search with no results. hmmm:waah:

68C20 CST

06-30-2012 07:27 PM

Re: BB pwr steering cannister...

3 Attachment(s)

Here ya go

Tom Vogel

06-30-2012 07:47 PM

Re: BB pwr steering cannister...

Wow... 68 must have been way different than 72. As I recall, the 72's were mounted on the fender toward the front without any stand off bracket. Hmm
Posted via Mobile Device

leddzepp

06-30-2012 08:16 PM

Re: BB pwr steering cannister...

Quote:

Originally Posted by Tom Vogel (Post 5462669)

Wow... 68 must have been way different than 72. As I recall, the 72's were mounted on the fender toward the front without any stand off bracket. Hmm
Posted via Mobile Device

this is correct
Posted via Mobile Device

FriscoDave

07-01-2012 01:21 PM

Re: BB pwr steering cannister...

2 Attachment(s)

Not the best angle, but hope this helps.

Tom Vogel

07-01-2012 04:01 PM

Re: BB pwr steering cannister...

That looks right, Thanks!
Posted via Mobile Device

All times are GMT -4. The time now is 04:46 AM.