need a shifter
 

I am looking for a floor shifter. was wondering what you guys use? i dont like the ratcheting style of the mega shifter. i do like the pro ratchet but dont think i like the no neutral lock out. i was wondering if the pro shifter has the neutral lockout? or recommendations

Re: need a shifter
 

I have the B&M Pro Stick and yes it has a lockout for neutral. To put it in park I have to lift the lever.

Re: need a shifter
 

Do you have a pic?

Re: need a shifter
 

Re: need a shifter
 

here's a picture of my old hurst quarter stick.... and one of my new lokar shifter, not installed yet...

Re: need a shifter
 

I run a b&m pro stick in mine but didn't like the lockout either with my overdrive. So I took the gate out and sanded down but left the nuetral/reverse stops in place..
Posted via Mobile Device

Re: need a shifter
 

I also run a B & M pro stick . I prefer the t- handle and T style trigger vs the ball and lever . Mine is on a custom stand and the trans brake buttom is mounted to the cover .
http://i47.photobucket.com/albums/f1...e420120032.jpg
http://i47.photobucket.com/albums/f1...e420120031.jpg

Re: need a shifter
 

Old shifter, B+M shifter that was bent in a 5ton press, then extended with threaded rod to reach the "truck" position with my seats.
http://i112.photobucket.com/albums/n...y/DSCN0086.jpg

My new one (will have the same knob)
http://i112.photobucket.com/albums/n...IMAG0125-1.jpg

Re: need a shifter
 

I use a b@m unimatic with a high hump tranny tunnel, used to have a rachet shifter but my knuckles kept smashing into my gauges below the dash