The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - AZ Pulleys and brackets (https://67-72chevytrucks.com/vboard/showthread.php?t=537701)

Timbo1

08-09-2012 04:59 PM

Pulleys and brackets

2 Attachment(s)

I have brackets and pulleys for sbc, comes with all the bolts, Chrome 1 wire alt, p/s pump, brackets are made to hold a sanden compressor. $150.00 plus shipping thanks. 1st picture of it installed , 2nd one after it was removed.

HotRod C/10

08-09-2012 05:19 PM

Re: Pulleys and brackets

Long or short water pump setup? Interested
Posted via Mobile Device

Timbo1

08-09-2012 06:07 PM

Re: Pulleys and brackets

Quote:

Originally Posted by DSALRAM (Post 5531101)

Long or short water pump setup? Interested
Posted via Mobile Device

Sorry short.

shawno72

08-09-2012 06:09 PM

Re: Pulleys and brackets

What kind of headers do you have on that engine?

Timbo1

08-09-2012 06:11 PM

Re: Pulleys and brackets

Quote:

Originally Posted by shawno72 (Post 5531170)

What kind of headers do you have on that engine?

Headman

DesertCat

08-09-2012 06:42 PM

Re: Pulleys and brackets

Aarrggh! I would be all over this except for the fact that I have camelback heads (do I dare drill them?) need the pulleys if they are 2/3 and you separate

HotRod C/10

08-09-2012 07:13 PM

Re: Pulleys and brackets

Quote:

Originally Posted by DesertCat (Post 5531203)

Aarrggh! I would be all over this except for the fact that I have camelback heads (do I dare drill them?) need the pulleys if they are 2/3 and you separate

And i really just want the rest of it..... Im doing billet pullys
Posted via Mobile Device

HotRod C/10

08-09-2012 07:15 PM

Re: Pulleys and brackets

Quote:

Originally Posted by Timbo1 (Post 5531172)

Headman

Got a model # for them?
Posted via Mobile Device

k5hart

08-10-2012 07:43 AM

Re: Pulleys and brackets

Any idea what Amp the alternator is? Has any of it been used for more that mock up?

Timbo1

08-10-2012 10:39 AM

Re: Pulleys and brackets

Quote:

Originally Posted by DSALRAM (Post 5531237)

Got a model # for them?
Posted via Mobile Device

Not handy but I will se what I can do.

HotRod C/10

08-11-2012 04:54 PM

Re: Pulleys and brackets

Quote:

Originally Posted by Timbo1 (Post 5532159)

Not handy but I will se what I can do.

any luck, I need to order headers soon

Timbo1

08-11-2012 05:02 PM

Re: Pulleys and brackets

Quote:

Originally Posted by DSALRAM (Post 5534133)

any luck, I need to order headers soon

Thanks for the reminder, Headman 68600
Posted via Mobile Device

HotRod C/10

08-11-2012 05:08 PM

Re: Pulleys and brackets

Thanks bud....stillinterested in the P/S and alternator set if the other guy needs the pullys....LMK

All times are GMT -4. The time now is 05:54 PM.