The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)

- - Will this DBW work for me? (https://67-72chevytrucks.com/vboard/showthread.php?t=539375)

Nitschke

08-21-2012 03:23 PM

Will this DBW work for me?

The pedal assembly is from a 2008 gmc sierra 1500 for $25. The motor is an ly6 from a 2009 the 6l80e from a 2010. Going in a 1972 chevy pickup. the question is will this pedal assembly work for my application? Thanks.
Posted via Mobile Device

68GMCCustom

08-21-2012 06:25 PM

Re: Will this DBW work for me?

As far as I know....the '07up trucks use the same pedal. My truck is also an LY6....you'll want the "all plastic" pedal and assembly.

Nitschke

08-22-2012 01:36 AM

Re: Will this DBW work for me?

Awsome thank you! Do the 07+ have tack module like the others?
Posted via Mobile Device

mcmlxix

08-22-2012 01:43 AM

Re: Will this DBW work for me?

Quote:

Originally Posted by Nitschke (Post 5551618)

Awsome thank you! Do the 07+ have tack module like the others?
Posted via Mobile Device

07 was the cut over year.... if you have the newer E38 computer, I'm pretty sure there is no TAC module.

e38

http://images.gmhightechperformance....tory_pcms+.jpg

68GMCCustom

08-22-2012 08:35 AM

Re: Will this DBW work for me?

I have the bottom ECM in the pic
Posted via Mobile Device

clinebarger

08-22-2012 07:34 PM

Re: Will this DBW work for me?

1 Attachment(s)

Gen IV engines do not use a TAC module.

Some help with PCM identification....These PCM do not have transmission functions, So if your running a "E" trans you need a TCM.

EDIT...You have a 6 speed....TCM is in the trans, sorry.

All times are GMT -4. The time now is 10:41 PM.