The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   my 69 project (https://67-72chevytrucks.com/vboard/showthread.php?t=540553)

walterbolton 08-29-2012 03:06 AM

my 69 project
 
3 Attachment(s)
my uncle bought this 1969 brand new, finally got my aunt to let me have it. been setting since 1995.
350/th400 combo
was 99% original
i changed the intake,carb and added HEI distributor. pulled the plugs and soaked the cylinders with atf. replaced all fuel lines(has aftermarket fiberglass saddle tanks) replace fuel pump. new wires and plugs,flushed coolant system. changed oil and filter,filled up with fuel and fired her up. runs perfect. now to start something i just dont know what. was conflicted about putting the aftermarket intake and HEI unit on it but i kept all the original parts.
i think i am going to clean up the truck do a little of this and that to improve drive ability. truck just has a little over 98,000 original miles, no odometer roll over, my uncle worked just a 1/4 mile from the house and he only drove it back and forth to work and to his lake house about 60 miles round trip other than that we took my aunts car every where since it was more comfortable and got WAY BETTER fuel mileage. he bought a new 1983 chevy and parked the 69 until i got old enough to drive, i drove it for two years around town and to school until i got enough money to buy my own car. we then took it to the lake and used it to load and unload the boat(that's why it has a trailer ball on the front),haul trash and that was it. one day he was going to move the boat and the truck wouldn't start so he just pushed it in the back and there it sat

walterbolton 08-29-2012 03:12 AM

Re: my 69 project
 
2 Attachment(s)
put a set of factory 4x4 wheels on it and cleared the fender. i want to keep the patina but wanted to see if it would look ok. what you think?

alsriv2 08-29-2012 07:59 AM

Re: my 69 project
 
Great family history and a good save on this truck.

DO what you would like to with it and make it your own!

yuccales 08-29-2012 08:39 AM

Re: my 69 project
 
Quote:

Originally Posted by alsriv2 (Post 5563748)
Great family history and a good save on this truck.

DO what you would like to with it and make it your own!

Couldn't agree more.

chevytruckclassics 08-29-2012 02:59 PM

Re: my 69 project
 
hey you got the same car lift as me! :lol: anyways nice truck and good luck!

walterbolton 08-30-2012 03:47 AM

Re: my 69 project
 
Quote:

Originally Posted by chevytruckclassics (Post 5564379)
hey you got the same car lift as me! :lol: anyways nice truck and good luck!

i love this lift, got it at wal mart. they built a new super center here and closed the old gm store and auctioned off all the stuff inside. this lift was about 2 months old when i got it. $1200. and i had to remove


All times are GMT -4. The time now is 11:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com