Lets see some shaved firewalls
 

I'm thinking of shaving fmy firewall and want to see some pics. Does anyone have any info on where to buy the panels. I'm wanting to make the pass side match the driver side.

Re: Lets see some shaved firewalls
 

porterbuilt sells it to match

Re: Lets see some shaved firewalls
 

heres a pic of the piece porterbuilt sells, third pic is of it trimmed to fit.

Re: Lets see some shaved firewalls
 

Ill have to look into the porterbuilt stuff

Re: Lets see some shaved firewalls
 

I got my fillers from infantimachine.com

This is the kit I bought, I have not yet installed them though. http://infantimachine.com/~infanti/i...l-filler-panel

Much cheaper than Porterbuilt but the Porterbuilt pieces are much fancier. Also I dont think Infanti makes the corner piece. If you have the skill you could cut your own patches.

Here is the Porterbuilt kit http://www.porterbuiltfabrication.co...ller-Panels-99
There are install pics in the Porterbuilt link. I like that they use one panel and it has a nice bead roll line in it. Swanky!

Pic 1 Infanti

Pic 2 Porterbuilt

Re: Lets see some shaved firewalls
 

Here is a photo of how the porterbuilt one turns out

Re: Lets see some shaved firewalls
 

http://i948.photobucket.com/albums/a...l/0f646ac8.jpg
Here is mine after a recent Vintage Air install.I live in S.Florida,no need for heater.

Re: Lets see some shaved firewalls
 

Forgot to mention I made my old filler plates out of 1/8" aluminium.Cut them to fit flush and fiberglassed{yes glassed}them in,filled and faired.

Re: Lets see some shaved firewalls
 

here`s mine

Re: Lets see some shaved firewalls
 

Mine

http://i221.photobucket.com/albums/d...1/DSCF0054.jpg

Re: Lets see some shaved firewalls
 

my firewall on my 1968 truck
please see my build thread for more pictures of all the welding Page 3 of the build is where most of the interesting firewall welding is at.

notice the 45 degree cap on the wire gutter. Kevin (LFD) did an AMAZING job on this and all the welding and fabrication work


.http://67-72chevytrucks.com/vboard/s...d.php?t=369251



thanks to kevin (lfd) for all the hard work

Re: Lets see some shaved firewalls
 

mine...built my own panels

Re: Lets see some shaved firewalls
 

My son and I built our own panels, and also filled in the wire trough are, on about a 30 degree angle, heres several pic....Jim

Re: Lets see some shaved firewalls
 

and a couple more

Re: Lets see some shaved firewalls
 

mine..

Re: Lets see some shaved firewalls
 

Here's mine

Re: Lets see some shaved firewalls
 

Very nice! Like how you smoothed it out extra with the extra humps...