Help me! Buying used spindles!!
 

Hey all!
Been a member here for a few years but I just dont post much. I am in need of a little advice. I am going to meet a guy that has some drop spindles, supposedly for a 64-66 truck. They dont have part numbers on them but have "C10" cast into them with a little bell cast into them (I am assuming this means bell tech?). How would I go about making sure these are right? Also what measurements can I take to make sure what size rotor they are for (1" or 1 1/4" rotors)? any help would be appreciated!!

thanks
BrandonAttachment 981691

Attachment 981692

Attachment 981693

Re: Help me! Buying used spindles!!
 

I thought I should add that these arent actually "used", he just never got around to putting them on, so they are still technically new.

thanks

Re: Help me! Buying used spindles!!
 

The bell does not mean BellTech.
Belltech has the word "Belltech" cast right in to them with either part number 3100, 3200, or 3120 also cast into them.
Without checking balljoint fit or outer tie rod fit,... it's all just a guess.
How much are they?

New direct fit drop spindles for 63-70 drum brake trucks are only $219 new.