Getrag 5 speed with removable bell housing
 

Hey guys,
I drive a 68 C10 with what I believe to be a Getrag 5 speed. It even has the "G" logo near the tail shaft. All things lead me to believe this is the HM290 or 5LM60 except for one thing. The bell housing is not integrated. All I have read states it should be. Can anyone explain this to me? The # on the housing is 20844 and the output yoke is spicer 03 3 694.
Thanks,
Dave

Re: Getrag 5 speed with removable bell housing
 

is it an aluminum trans case and can you find any other numbers if its a getrag it should have a long sequence of numbers somewhere on the case

Re: Getrag 5 speed with removable bell housing
 

Yup, aluminum case. There is another 5 or 6 digit # on the bell but I don't see any other.
Posted via Mobile Device

Re: Getrag 5 speed with removable bell housing
 

Does this help? Best shot I could get without lifting the truck.

Re: Getrag 5 speed with removable bell housing
 

Uhh... and if you are not in Australia;

Re: Getrag 5 speed with removable bell housing
 

its a getrag out of about a 91 chevy 5 speed

Re: Getrag 5 speed with removable bell housing
 

Nice. That's what I've always believed it to be. I ordered a seal for it recently and it doesn't look like the correct one. I figured I had grabbed the wrong part number. No big deal. Then I started reading about these having an integrated bell. Figured I could ask and someone would clarify.
Thanks,
Dave