The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 67-68 grille insert.. (https://67-72chevytrucks.com/vboard/showthread.php?t=542410)

oldblue1968chevy

09-10-2012 04:05 AM

67-68 grille insert..

How do you fasten the grille insert (rivited in) I had to replace mine due to damage, how to I put it back?

Thanks

AdMiMc

09-10-2012 05:02 AM

Re: 67-68 grille insert..

GMC Pauls sells a clip set for it. It is about 8 items down the page listed as "67-68 Grille Molding Clip Set" for $39.95.

Here - http://www.gmcpauls.com/trim.htm

oldblue1968chevy

09-10-2012 03:38 PM

Re: 67-68 grille insert..

No, this is the rivited on from the factory...

AdMiMc

09-10-2012 04:30 PM

Re: 67-68 grille insert..

Sorry, I thought you were looking for the trim clips (LMC #6). LMC sells all of the grill parts and hardware including the bezel hardware set (#10).

http://www.lmctruck.com/icatalog/cb/full.aspx?Page=65

jaros44sr

09-10-2012 10:12 PM

Re: 67-68 grille insert..

Quote:

Originally Posted by oldblue1968chevy (Post 5585288)

No, this is the rivited on from the factory...

It will be difficult to get your grille hoop to lay flat, unless you rivets...there is no space for a bolt head to fit between the slots of the grille hoop

67ChevyRedneck

09-10-2012 11:17 PM

Re: 67-68 grille insert..

Screws. Small ones. I bought phillips head screws just big enough to cover the hole with a washer and nut on the backside. Works great.
Posted via Mobile Device

jaros44sr

09-11-2012 12:08 AM

Re: 67-68 grille insert..

Quote:

Originally Posted by jaros44sr (Post 5585994)

It will be difficult to get your grille hoop to lay flat, unless you use rivets...there is no space for a bolt head to fit between the slots of the grille hoop

Or you can do what redneck says:lol:

BigCountryx

09-11-2012 10:28 AM

Re: 67-68 grille insert..

Go to Harbor Freight and get you a cheap rivet tool, You'll be glad you got it, comes in handy.

All times are GMT -4. The time now is 05:29 PM.