Shocks for an '88 V10 Burb
 

It has come to my attention that the shocks on the Burb need replaced and I have ran into a few problems;

1) Every vehicle I have owned before was MacPhereson Strut so I have no idea what brands of shocks are worthwhile and what ones are :bsf:

2) I need to know if having the dual front shocks, factory mount style, makes a difference as to what shocks I need

3) I required resuscitation after seeing price quotes at the parts store due to an acute case of sticker shock :jdp:

So essentially I'm wanting to know what yal are using on your Burbs and what you think of them?

Thank You in advance for any and all input

Re: Shocks for an '88 V10 Burb
 

Personal choice for me is the MONROE SENSA-TRACS.
Last set of shocks you should ever have to buy for your ride because of the lifetime warranty on them. WARRANTY INFO

They are available through NAPA AUTO PARTS
Here's the breakdown on them......

Features & Benefits





The MONROE Sensa-Trac Truck Shock Absorber w/ Groove Tube Technology Combines Our Exclusive Precision Tapered Grooves In The Pressure Tube w/ Application Engineered Valving & Fluon Banded Piston To Improve The Ride & Handling.; All Weather Fluid: Contains Special Modifiers To Reduce Friction & Ensure Smooth Rod Reaction; Full Displaced Valving: Tuned Specifically For Each Application, This Valving Automatically Adjusts To Road Extremes To Provide Consistency & Ride; Fluon Banded Piston: The Fluon Band Provides Consistent Sealing Between The Piston & Pressure Tube Which Delivers Better Control & Increased Durability.; Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration.; 5/8" Piston Rod: Heavy-Duty Nitrocarburized Rod For Long Service Life. On Non-Dust Shield Units Only; Special Seal: "Self-Lubricating" Fluid Seal Designed To Retain Gas w/o Excessive Wear Or Friction.; Groove Tube Technology: Precision Tapered Grooves In The Pressure Tube Perform Like An Additional Stage Of Valving For Optimum Ride Tuning.

FRONT OUTER....Part # 37040

Attributes
Lower Mount : LS37
Shock Compressed Length : 11.875"
Shock Dust Shield : Yes
Shock Extended Length : 18.375"
Shock Parts Pack Part # : P816
Shock Travel Length : 6.5"
Upper Mount : LS37

FRONT INNER.....Part # 37042

Attributes
Lower Mount : LS40
Shock Compressed Length : 13.375"
Shock Dust Shield : Yes
Shock Extended Length : 21"
Shock Parts Pack Part # : None
Shock Travel Length : 7.625"
Upper Mount : LS40

REAR................Part # 37041

Attributes
Lower Mount : LS47
Shock Compressed Length : 14.125"
Shock Dust Shield : Yes
Shock Extended Length : 22.875"
Shock Parts Pack Part # : P19
Shock Travel Length : 8.75"
Upper Mount : L1/CP5

Re: Shocks for an '88 V10 Burb
 

Wow you are the man, these are just what I'll use on the dually sub when it's back to stock ride height. Love the fact of the LW. Dan

Re: Shocks for an '88 V10 Burb
 

Thank you very much for the advice! :D
I have got the parts ordered and will be getting the Monroe Sensa-Tracs... It may already have them on it, but since I'm not the original purchaser I can't claim the warranty. But at least getting the Monroes front and back is a lot more affordable than my other options.

Re: Shocks for an '88 V10 Burb
 

I don't know about where you are but up here right now NAPA's been advertising buy 3 get the 4th one free.

Re: Shocks for an '88 V10 Burb
 

Wait......... WHAT???!!!
I'm getting attached to another object by an inclined plane wrapped helically around an axis! lol

Re: Shocks for an '88 V10 Burb
 

Got the Sensa Tracs, got them installed and just got in my rebate for the 4 for the price of 3 deal... didn't find out about it until I went in store.

Also, surprise surprise the Burb rode a "little" rough because the shocks that were meant for a 1-ton truck and not a 1/2 ton :O !

Re: Shocks for an '88 V10 Burb
 

That's crazy. Are they going to let you swap them out???