The 1947 - Present Chevrolet & GMC Truck Message Board Network - GA Interior Parts #1 - Grey Door Panels, Dash Bezel, Electric Speedo Cluster, with pics

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)

- - GA Interior Parts #1 - Grey Door Panels, Dash Bezel, Electric Speedo Cluster, with pics (https://67-72chevytrucks.com/vboard/showthread.php?t=544858)

Interior Parts #1 - Grey Door Panels, Dash Bezel, Electric Speedo Cluster, with pics

This is the first batch of the last of the leftover stuff I found while cleaning up the storage building. I'll put up some more later after the digi-camera gets a chance to charge up.

Pair of Grey Door Panels, originally pulled from a 1990 Conversion Suburban - $125 +shipping. SOLD to pops45 for $110 These are in amazing shape - tight map pockets, not dried out or chalky plastic, no cracks, not gouged up, and because they were from a conversion truck that got leather/pleather they actually replaced the cloth wrapped section with a pleather/leather wrapping so they clean up with soap and water if you ever get them dirty. Even comes with the control switch for the power mirrors included. These were never armor-alled in my care, only wiped down with mild hand soap and water to remove storage dust before the pics were taken. The only negative things I can say about the complete units as they are being sold is as follows, and has nothing to do withthe plastic panels themselves: 1) the passanger side I did not see the chrome cup for around the handle so I flipped over the one from the driver's side for picture purposes to show what it would look like with one, I do not have one at the moment but will update if I can find it; 2) the drivers panel has a control mounted for a power seat, which you may want if you are going to put power seats in a truck, or might find another use for; 3) the chrome on the lock/window switch overlays shows age and are not in mint condition as could be seen in the pics below:

http://farm9.staticflickr.com/8038/8...4cc3d6cf_c.jpg

http://farm9.staticflickr.com/8322/8...5e5c1e77_c.jpg

http://farm9.staticflickr.com/8322/8...d52d7033_c.jpg

http://farm9.staticflickr.com/8312/8...78a8e102_c.jpg

1.5 Din Sized Woodgrain Dash Bezel, removed from the same 1990 Suburban, $50 plus shipping or trade for a mid 1970s woodgrain bezel in similar condition. I've decided to stay shaft-style radio in my 2 trucks in the time since purchasing it. No cracked tabs or mounting holes, nice woodgrain without damaged screw holes, minor wear to the silver/chrome paint on the edge of the rings and the letter "L" in lights has worn its silver paint off as can be seen in the pics.

http://farm9.staticflickr.com/8452/8...9b66301f_c.jpg

http://farm9.staticflickr.com/8040/8...3614f69e_c.jpg

http://farm9.staticflickr.com/8452/8...5ca55427_c.jpg

http://farm9.staticflickr.com/8175/8...e97284ba_c.jpg

http://farm9.staticflickr.com/8313/8...e19c7121_c.jpg

http://farm9.staticflickr.com/8322/8...8d0a1748_c.jpg

Electronic Speedometer Cluster for 1990-1991 C/K Trucks, $75. This was a spare I'd bought but never needed from when we had the K5 Blazer which was sold in 2007, and I don't see a point in keeping this anymore. Nice clear lens, had one corner cracked off in a tab on the bottom center right side, not where any screws go through, and I snapped a tab off a junk cluster that can go with it if you really want to go through the effort of trimming them and gluing it back on, but serves no purpose I can see to bother doing so. Pics:

http://farm9.staticflickr.com/8176/8...f65d1817_c.jpg

http://farm9.staticflickr.com/8039/8...a0392fdc_c.jpg

http://farm9.staticflickr.com/8454/8...98479930_c.jpg

Sneak peek: I will be adding another thread a woodgrain 77-80 door trim panel, dash bezel, red overhead console, red center console, and blue 81-87 door panels once I get the camera charged for the last of the pictures later tonight, and I saw a couple Holley carbs and some gear sets on the shelf that depending what they are I may wind up listing next as well.

As always, everything is available for local pickup just outside Metro Atlanta, and I'd be more than happy to trade for something I can use/need for my 76 SWB C10 Silverado or 87 V10 Suburban Silverado, especially NOS parts :chevy: