metal clutch deletes also a couple plastic ones
 

$11 shipped each money order only

Re: metal clutch deletes also a couple plastic ones
 

Hello Randy,
In the engine bay of my GMC Longhorn right off of the driver side valve cover I have a 2 inch diameter type hole. I have a used gasket type tubular assembly for it like the one on my Chevy Longhorn I have with Manual Transmission, but the GMC is a automatic. Does this cover go to this area or spot? I do not see any screw holes on my GMC around the hole, but that can be fixed. I have been looking for what covers this up for a very longtime. Let me know?
R/
Billy

Re: metal clutch deletes also a couple plastic ones
 

Billy, yours probably came with a plastic one, some of the early ones did. The spot your talking about sounds like the clutch rod hole. Thanks Randy

Re: metal clutch deletes also a couple plastic ones
 

Thanks Randy for always helping me out, I appreciate my Board Brother!!!! Another gentleman selling the plastic ones has contacted me and I will get one. As always GOOD LUCK on all of your sales, till next time.
R/
Billy

Re: metal clutch deletes also a couple plastic ones
 

Hey Billy,
Sounds like Randy has some of the plastic ones too, I thought he just had the metal ones in the picture. I would never try and step in on a sale so I would prefer if you work out a deal with him :chevy:
Posted via Mobile Device

Re: metal clutch deletes also a couple plastic ones
 

Hello Randy, MAHANIAN,
I am sorry I miss understood, did you have some plastic ones available Randy? Sure I would love to get one from you if so. This goes to show even as much as I have worked on these things, I did not know what goes in that Clutch hole.
Thanks to the other gentleman (MAHANIAN) for helping out. You both are good people on here. I can buy one from both of you, it is no problem.
R/
Billy

Re: metal clutch deletes also a couple plastic ones
 

Hey guys, no worries here. I do have one plastic one and maybe a couple others out there. They are used though. Whatever you decide is fine Billy, your always on my good list;). Thanks Jared for being so up front about the whole deal.:chevy:

Re: metal clutch deletes also a couple plastic ones
 

Hey Randy, Looks like you have quite the pile of clutch delete plates there !
I bought one off the board last year and now that I am in the process of changing over from sm465/np205 to a 350TH/np205 do you think I can find my "stashed it for later use" hidey hole ? :lol::waah: If I don't find it by this week-end put me down for a metal one for sure. Doubt that you need anything with as many trucks as you part but I sure do like "hoss tradin" if and when at all possible. Let me know, Gary B.

Re: metal clutch deletes also a couple plastic ones
 

Sure Gary we will work something out

Re: metal clutch deletes also a couple plastic ones
 

Randy, finally found the clutch delete I was looking for. Boy, do I need to get my stuff organized, really like the way you have your "stuff" shelved and seperated as you do. I'm jealous, :lol:

Re: metal clutch deletes also a couple plastic ones
 

Can I get one of your plastic ones Randy?

Re: metal clutch deletes also a couple plastic ones
 

Hi Randy,
How much do I need to send you for a cover shipped? Thanks
R/
Billy

Re: metal clutch deletes also a couple plastic ones
 

$12 Billy, Thanks Randy

Re: metal clutch deletes also a couple plastic ones
 

Good deal Randy, I am on it.
R/
Billy

Re: metal clutch deletes also a couple plastic ones
 

hi randy .when you get a chance could you check to see if you have these.please shot me aprice plus shipping 14580 zip thanks mark 2) headlamp retainer rings plus screws 1) rear body light harness p/u 1) defoster outlet rightside 2) a/c outlet bezal and ball holder 2) best you got wiper arms 2) large phillips head screws that hold the dimmer switch 2) upper radiator hold down standerd duty

Re: metal clutch deletes also a couple plastic ones
 

Sounds good Billy

Mark, I have headlight rings. Sorry no taillight harnesses right now. I have defrost vents. What side ac outlet and ball holder? I have alot of wipers. I'll have to look on dimmer switch screws. I have a pair of upper rad holddowns. Let me know of stuff I asked questions about and I'll get pics

Thanks Randy

Re: metal clutch deletes also a couple plastic ones
 

hi randy , i need both sides for the a/c pieces plus a price thanks mark

Re: metal clutch deletes also a couple plastic ones
 

Hello Randy,
The MO is on its way!
R/
Billy

Re: metal clutch deletes also a couple plastic ones
 

fine 67, Mark, sorry for delay, here are pics of stuff if your still needing parts

Re: metal clutch deletes also a couple plastic ones
 

Hello Randy,
I recieved the part and it looks great, as always thanks for hookin up a board brother. I apoligize for the late reply, I have been in NM for two weeks. Food for thought, if you come across a smaller frame bar that mounts with two bolts, one each side that is installed right above the spare tire on the outside of the frame, let me know, I need one, mine is severly bent and welded on. Till next time my friend.
R/
Billy

Re: metal clutch deletes also a couple plastic ones
 

I will take a metal one
Posted via Mobile Device

Re: metal clutch deletes also a couple plastic ones
 

I still have alot of these

Re: metal clutch deletes also a couple plastic ones
 

Randy,put me down for a metal one please,Calvin.

Re: metal clutch deletes also a couple plastic ones
 

OK Calvin, I will pm you tonight. Thanks Randy

Re: metal clutch deletes also a couple plastic ones
 

Calvin, mailing it out Thurs, Thanks so much, Randy