The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)
-   -   More Lift (https://67-72chevytrucks.com/vboard/showthread.php?t=547215)

RRR18 10-12-2012 06:11 PM

More Lift
 
Hey boys! Need some help. I just got new wheels/tires on my '03 Silverado 1500 4WD. It has a 6" lift kit on already. I can lift the rear up more in many different ways no problem. My question is what to do about getting the front up a bit more? Should I crank on the torsion bar key bolts or get leveling torsion bar keys themselves? I'm tryin for 2" more. Of course I know whichever way I go I'll need an alignment. Or if you think of different way lemme know. Thanks.
Posted via Mobile Device

RRR18 10-14-2012 11:13 PM

Re: More Lift
 
Nobody?

1978steven 10-18-2012 07:50 PM

Re: More Lift
 
I'd start by using the stock torsion bolts and hopefully that will get you where you want to be. But if you go with leveling keys be very careful not to over crank them bars, the ride will suffer severely, and your front end parts will wear out quicker then you can replace them because of the severe angles they will be set at...
Posted via Mobile Device


All times are GMT -4. The time now is 05:33 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com