ART Strong Arm control arms
 

I have a set of new (used for mockup only, 0 miles) ART upper and lower strong arms. These arms have the 73-87 ball joints installed. Upper control arm part number is 11363699, lower control arm part number is 11361499. Asking price is $800 plus shipping for the full set. I am not really wanting to split them up at the time but will accept offers. Let me know if there's any questions. :chevy:

http://i18.photobucket.com/albums/b1...Picture025.jpg

Re: ART Strong Arm control arms
 

This might be a dumb question, but can these be used with a coil spring? Obviously, you wouldn't use the upper bag plate.

Re: ART Strong Arm control arms
 

Yes they can. You'd have to get the billet piece from porterbuilt that bolts to the lower plate on the lower arm to hold the spring.
Posted via Mobile Device

Re: ART Strong Arm control arms
 

Are these stock geometry and track width control arms? Do you have to use the aftermarket sway bar with these or will they accept factory sway bars? Need any parts as a partial trade/ cash deal? Interested.
Frank
Posted via Mobile Device

Re: ART Strong Arm control arms
 

I believe they are stock lengths but probably have different ball joint angles for the amount of drop you usually have with them. You can use the ART muscle bar and I also think I read that Porterbuilts sway bar should bolt up to them. His is $250 vs the $400 for the ART. Not really looking for any trades.
Posted via Mobile Device

Re: ART Strong Arm control arms
 

Replied to your pm.
Thanks,
Frank
Posted via Mobile Device

Re: ART Strong Arm control arms
 

I'm interested in these, will you consider selling just the lowers?
What part of TX you in?