fenders painted and on
 

Well I got the fenders painted and on. Body lines are fairly good but I did notice something that someone else on here had a problem with and that is that the radiator shroud is not centered now. Its about an inch to high. Thats about the thickness of the radiator bushings. How many trucks run with no bushings at all there. I also had to put spacers at the front of the cab to get the right gap at the bottom of the fender and doors. If I take the bushing out of the bottom of the radiator I can take the shims back out of the front of the cab. Any ideas.

Re: fenders painted and on
 

you're makin me miss ol blue :whine:
looks very nice!

Re: fenders painted and on
 

Sexy! The color choices and trim are perfect (I love blue!)

Re: fenders painted and on
 

the core supp. bushings for 67-68 are different than 69-72.....make sure you have the right ones,that is where i would start.

Re: fenders painted and on
 

Mr Chevrolet: you have that truck looking good. like the blue and white..sorry i cant help on the support problem....

Re: fenders painted and on
 

Very nice, I really like that color
Posted via Mobile Device

Re: fenders painted and on
 

Looks great man! I cant wait for mine to loo like that, someday..:lol:

The core support mounts are different for 67-68 like others said. They were some thin rubber strip washers instead of the tall bushings. Here is a pic from the LMC catalog, it shows a pretty good diagram of the different core supt mounts.

Re: fenders painted and on
 

sounds like you used 69-72 bushings. BTW, love the color.

Re: fenders painted and on
 

Thanks for the complements and thanks for the bushing info. I used bushing set for the 69 to 72 four wheel drive.i will replace the front radiator bushing with 67-68 ones. thanks once again