Leftover parts: Cab, K30 frame, core supports, etc...
 

Hello all,

Need to buy a few ton of coal soon, looking to clean out some project leftovers:

NIB Energy suspension body mount sets - Have '73-80 and '81-87, one of each in black. $60 for '73-80, $75 for '81-87 obo.

NIB Milemarker hubs - External (bolt-on), for early 3/4 ton Dana 44 axles. $85

'84 core support - Solid, very little (if any) rust. $100 obo.

'73-80 core support - Very solid, no rust. $100 obo.

Brand new 25 gallon Blazer (or rear mount pickup) gas tank. $100

I'm sure there's more, that's all for now. Some of this stuff I had no idea what to list for, so make offers. Will make package deals as well if someone makes a trip ;).

Most items local pickup in central PA, near Williamsport. Would ship the body mounts or hubs, that's about it :).

Can get pics of anything if interested, working right now :(.

Thanks,

Joe
Posted via Mobile Device

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

So did you ever get a K30 dump together?

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

Gerry,

No, sadly I did not :(.

Came upon an '01 C3500HD chassis last summer that was thought to have a bad engine (6.5 TD), as it was run low on oil. Truck was immaculate, owned by a roofing company with only 87k miles. Bed was missing, otherwise complete. Bought the truck for $250 and drove it home, never needing an engine. Located a 10' Iroquois dump body (with telescopic cylinder) and installed it last fall.

Not sure if you're familiar with the 3500HD line, but they had a GVW of 15K, Dana 80 rear (10 lug) with 19.5" wheels, and solid I-beam front axle. Not 4wd, but a very heavy beast. More of a 4500 or 5500 series than a 3500 ;).

Anyway, hated to give up on the dream. Really wanted a K30, this was (in many ways) more practical though...

Joe
Posted via Mobile Device

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

Sorry to hear that. I use a 2012 K3500HD as my work truck. Nice to have "new" dependable stuff. The K30 dump I have is a "as needed" truck, nice but wouldn't want to drive it everyday. Good Luck.

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

I would be interested in the core support depending on pix. As far as shipping, if you could just wrap it really good and give me a weight I can email you a sticker to put on it and get FEDex to deliver. Also depending on what shipping would cost. NP problem if you don't want to sip, this is a would be nice if it is really clean but not a need.

Thanks,
Steve

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

Steve,

I'll get some pics tomorrow. Are you interested in the '73-80 support or the '81-87 unit?

If you send the label and such, I could work something out. Worst part will probably be driving it to FedEx (20 miles or so), but they may be able to pickup ;).

Thanks,

Joe
Posted via Mobile Device

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

sorry, the 73-80 one............scjkovach@gmail.com

Thanks,
Steve

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

Pics sent yo your email.

Thanks,

Joe

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

Thanks, looks good but depends on shipping. I found one local but have to pull it myself , after i pull the truck out of the woods for the guy. Too much work...............

steve

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

I think I'll take the 81-87 body mounts. Do you have a part number?

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

I can surely get you one :). Working right now, I'll try to check when I get home (before I head to bed :()...

Thanks,

Joe
Posted via Mobile Device

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

Steve,

Will try to weight it tomorrow. Working again tonight, just got home and heading to bed :(...

Part number 3.4116G. Here is a pic:

http://i473.photobucket.com/albums/r...-49-04_712.jpg

Let me know, thanks

Joe

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

Sorry, for some reason I thought they were for a Suburban.

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

I need the front core support bracket/ spring hangers
Posted via Mobile Device

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

May have a set from a '79 K20 frame, not sure if the tops are rusted out or not. Don't really want to cut them off of the K30 frame, as its complete. I believe they were the same from K10-K30 though, so they should work...

Let me know if you're interested and I'll check on them tomorrow.

Thanks,

Joe
Posted via Mobile Device

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

sorry i dont know if im reading this right or not
are you tring to sell the cab complete or are you willing to cut it up for sheetmetal?

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

Selling complete ;)

Joe
Posted via Mobile Device

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

Yes I'm intrested pending price and shopping to 75042 as long as there the same as a k30
Posted via Mobile Device

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

Steve,

Sorry for the delay :(.

Weighed the core support today. Weight is approx 65-70 lbs and dimensions are roughly 6' long X 2' high X 1' deep...

Let me know if the shipping is something you want to do. Would be coming from 17740 ;).

Thanks,

Joe

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

PM sent...

Joe

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

I checked into it, the shipping is the killer. Great price for the core though. I did find a 75 truck local that has a great front end, but I have to buy the whole truck. I am tired of stripping trucks.........on well, I tried. Thanks for checking the weight for me. I am going to pass.

Have a good Thanksgiving,
Steve

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

Make offers guys, need money for Christmas :).

Joe

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

Tough economy we're in, I'll pass the word.

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

Bump :)

Joe
Posted via Mobile Device

Re: Leftover parts: Cab, K30 frame, core supports, etc...
 

Is the K30 frame still available? Where in PA are you? Got any pictures? Thanks!
Posted via Mobile Device