67c10 build
 

Posted via Mobile Device
Day I brought it home after a lot of Craigslist searching. I could barely get it on the trailer, no springs front or rear and one tie rod haha

Re: 67c10 build
 

Frankenstien
Posted via Mobile Device

Re: 67c10 build
 

Congrats! she is as colorful as mine :lol:

Re: 67c10 build
 

Thanks, I think it may be a few trucks in one haha. Couldn't wait to tear it down and start workin on it
Posted via Mobile Device

Re: 67c10 build
 

Can't fab so I got a c-notch from cpp
Posted via Mobile Device

Re: 67c10 build
 

Re: 67c10 build
 

New Ece crossmember in place of the stock one. Very sweet, high hoop for pinion angle and exhaust cut outs. Very impressed with there products and service
Posted via Mobile Device

Re: 67c10 build
 

Just about ready for sandblasting...
Posted via Mobile Device

Re: 67c10 build
 

Looking Good !!!

Re: 67c10 build
 

Thanks, hoping joining the site will help push me along
Posted via Mobile Device

Re: 67c10 build
 

After sandblasting
Posted via Mobile Device

Re: 67c10 build
 

Re: 67c10 build
 

Just got it home from powdercoat. Put in my new trailing arms from Ece, my stock ones were bent up and twisted. It was Nice being able to start with something clean and like new
Posted via Mobile Device

Re: 67c10 build
 

Front crossmember back in. Got all the hardware from my local Home Depot, great selection on grade 8 hardware
Posted via Mobile Device

Re: 67c10 build
 

New raybestos upper and lower control arm shafts powdercoated
Posted via Mobile Device

Re: 67c10 build
 

2" drop springs
Posted via Mobile Device

Re: 67c10 build
 

6" rear drop springs, shock mount relocator brackets and adjustable pan hard bar from ece
Posted via Mobile Device

Re: 67c10 build
 

Re: 67c10 build
 

Great start, I cant wait to see more.
What are your plans for brakes, are you doing Disc up front and Drums in the back?
Also out of curiosity since the truck is pieced together from a bunch of different trucks does the vin plate on the cab match the stamp on the frame, because depending on the state it can be a real pain to make it legal again if it doesnt.

Re: 67c10 build
 

Thanks, the vin actual does match withe the title, vin tag and frame. I've got pictures of the brakes I will upload
Posted via Mobile Device

Re: 67c10 build
 

13" cpp big brake disk front. Pretty sweet kit, everything for the front came assembled. 2.5" drop spindles were raw cast though so I pulled it apart to powder coat the spindles. Only downfall is my stock 15s won't work as rollers cause they won't clear the brakes so it'll be camped out on jack stands for awhile
Posted via Mobile Device

Re: 67c10 build
 

12" rears waiting for a rear end to go on
Posted via Mobile Device

Re: 67c10 build
 

With suspension in at 4.5 in front on a 2.5" drop spindle and 2" drop spring set up for a sb. I may go big block and adjust the rear to match the front, maybe a 1" rear block setting it about 5/7
Posted via Mobile Device

Re: 67c10 build
 

Yeah those big brake kits really like 16" or larger wheels.
It shouldnt be a problem though since more late model cars and trucks are comming from the factory with larger wheels and tires these days so the tires will be much less expensive than years past. Are you thinking about a 18" or larger wheel?

Re: 67c10 build
 

Yeah I would like to run 20s on it. 8.5 up front and 10s in the rear
Posted via Mobile Device