The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)

- - 66 C20 Project (need stance advice) (https://67-72chevytrucks.com/vboard/showthread.php?t=553141)

joeydirt

11-23-2012 11:26 AM

66 C20 Project (need stance advice)

1 Attachment(s)

So the first pic is about the stance Im looking for and the 2nd is actual, It should be approx 4 inches lower in photochop and Im thinking the front should be 1 inch lower. I need to order some springs and I was thinking 4 rear and 3 front...thoughts?
http://i1304.photobucket.com/albums/...e/66render.jpg

j3564wost

05-29-2013 10:51 PM

Re: 66 C20 Project (need stance advice)

Did you drop it yet? Pics?

joeydirt

05-30-2013 06:35 AM

Re: 66 C20 Project (need stance advice)

Quote:

Originally Posted by j3564wost (Post 6097612)

Did you drop it yet? Pics?

ya
http://67-72chevytrucks.com/vboard/s...&postcount=322
I did two inch springs which turned out to be about 1 inch less than my saggy stocks springs and a two inch block in the rear. Just picked up a late model crossmember(5 lug) and Im going to put that on with drop spindles soon

All times are GMT -4. The time now is 09:21 PM.