transfer case wanted
 

I'm looking for a transfer case for a 69 3/4 ton chevy. It had a rockwell T221 in it. I might be interested in selling it too.

rockwell
 

I have a very good M465 tranny & rockwell xfer case combo. $300. Won't split up. Might be in Kansas in a week or 2.....Zoomy

ok, What's your phone # or email address?

I have a rockwell transfer case out of a 69 GMC 3/4. $75 plus shipping from 16335. Let me know. Thanks.

how much does it weigh? My zip is 66801

I'll weigh it tonight and get back to you in the morning.

I'm in Manhattan and have a 205 for a stick. No shifter, or linkage. Need the adapter. Email if interested.

What all do I need to convert to a 205? How much do you want for it?

I also need to change the 292 over to a 350. What mounts or crossmember do I need?

Here is everything you would need...
 

And even some you dont!

I could be convinced to deliver this truck, I hope to be picking up a truck near K.C., MO in the near future.

look at this:http://67-72chevytrucks.com/vboard/s...&highlight=k10

How can I tell if I have an M465 transmission?

M465
 

Go to the 4x4 board & do a search. There are pix of them there. A guy named Pont posted some about 2 months ago.....Zoomy

A 465 trans has a pto plate on both sides

Here's a pic of the SM465 I put in my truck. The SM420 sitting on the floor also has a PTO cover on each side of the case but I believe they quit building them in 67 and may have installed them in some 68 trucks as well. I don't know if they ever made it into the 69 year. An easy way to tell if it's a 420 or 465 trans is by the location of reverse. On the 420, reverse is towards the driver then back towards the seat. The 465 trans has reverse towards the passenger and back towards the seat.



http://www.imagestation.com/picture/...e.jpg.orig.jpg

My tranny has two pto doors and the reverse is on the passenger side and back.

Your tranny is the SM465.

I bought a parts truck today that has about everything I need.....thanks guys