Broken drop spindle
 

Have you guys seen one do this before?
Posted via Mobile Device

Re: Broken drop spindle
 

what brand was it?

Re: Broken drop spindle
 

wow

Re: Broken drop spindle
 

When I bought the truck they were installed already. It just happened yesterday, so I haven't had a chance to start ripping it apart yet. Didn't see any markings though. I'm just glad it happened backing out of a parking space and not going 60 mph.

Re: Broken drop spindle
 

Are they drop spindles or standard spindles?

Re: Broken drop spindle
 

Drop spindles.

Re: Broken drop spindle
 

Might just be me but they don't look like drop spindles. Pin appears to be centered in the spindle.

Re: Broken drop spindle
 

Standard spindles have the pin at the bottom.
It was hard to tell for me,... with out seeing the outer tie rod.

Re: Broken drop spindle
 

Re: Broken drop spindle
 

Yep i was wrong. What else is new:lol:

Re: Broken drop spindle
 

Do you guys have any brand recommendations? No way I'm just going to replace the broken side and trust the other one.

Re: Broken drop spindle
 

Belltech, McGaughy's, Western Chassis.
What year truck?

Re: Broken drop spindle
 

I would suggest Bell tech or Mcgaughys. Not the cheapest but both are quality.
Posted via Mobile Device

Re: Broken drop spindle
 

Truck is an 84. Truck has belltech shackles and hangers on the back. Wish I can find a marking on the spindles.

Re: Broken drop spindle
 

Belltech and Western Chassis has their name cast right into the spindle.
So does CPP.
I bet these are airbagit.com or some other junk.
What did the bearings look like?

Re: Broken drop spindle
 

If you order spindles,... just remember there are 2 different 73-87 spindles.
Measure the width of your rotor.
They will be 1" or 1-1/4" wide.
You will have to order the spindle to match the rotor.

Re: Broken drop spindle
 

Bearings are still in rotor, greased and spinning free. I'm going out not to take the dust cover off and see if I can find out what they are. Sucks not having a garage when it's snowing.

Re: Broken drop spindle
 

I use Western Chassis on my truck. I drive it hard too. No problems.

Re: Broken drop spindle
 

Any guesses?
Posted via Mobile Device

Re: Broken drop spindle
 

I'll be sure to think of this thread the next time my speedo is buried at 85mph...

Re: Broken drop spindle
 

Look at the back of the spindle for a name or markings also.

Re: Broken drop spindle
 

Looks like a Chassis Tech spindles imo. I've never had a spindle breakage problem with any of the brands thankfully.
Posted via Mobile Device

Re: Broken drop spindle
 

Wow that sucks! Can you see any evidence of a casting defect? I'd really like to know who's spindle this is as well...

Re: Broken drop spindle
 

http://67-72chevytrucks.com/vboard/s...hlight=Spindle
Posted via Mobile Device

Re: Broken drop spindle
 

260 South Hibbert
Mesa, AZ 85210

take your spindle to them and send it through their window. they could have killed you, its the least you could do