The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   Fuel line ??? (https://67-72chevytrucks.com/vboard/showthread.php?t=553931)

farmtrucks 11-28-2012 02:36 PM

Fuel line ???
 
http://www.ebay.com/itm/25-FT-5-16-I...6747b5&vxp=mtr

would this line be good to use with the dorman #800121 barb fitting

ls1nova71 11-28-2012 11:05 PM

Re: Fuel line ???
 
That hose will work, but I would keep it to a minimum, at flex points between steel hard line. I wouldn't run it the full length.

BR3W CITY 11-29-2012 01:53 AM

Re: Fuel line ???
 
agreed...it'll work, but you should only need a few feet....the 25ft roll your looking at foreshadows something ominous.

Wasted Income 11-29-2012 01:26 PM

Re: Fuel line ???
 
Back in my youth, I almost lost my C-10 because of rubber fuel line.

Stainless braided or hard line isn't that much more work/cost.

mooseknuckles 12-01-2012 11:52 AM

Re: Fuel line ???
 
just use it for the joints.....I have a couple 6" chunks that join the tank to the stock lines and pump, and then at the filter/reg...the rest after the regulator to the fuel rails is braided -6an...


All times are GMT -4. The time now is 06:01 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com