NEW set of 1.6 ratio roller tipped rocker arms.
 

This is new set of small block 1.6 ratio roller tipped,stamped rocker arms. I believe they are Comp cam but no longer in box. they come with anti-gall balls ( hold the comments fellows!) . you can re-use your stock nuts or buy new ones for cheap. these are selling on ebay for $99 I want $79 + shipping for this set. I used to use these to wake up the stock 305/350 cam a bit over the stock 1.5's. I never even had to open up the pushrod holes.

Along with all the truck stuff that I have are quite few Hot rod parts mostly for small blocks. I will start listing a few things here and leave on for few days before I start listing on ebay. I have a few used but perfect alum. intakes, some valve covers. , Hei's . etc.
first come first serve by personal Email . NOT pm's

I have paypal or accept money orders.

thanx , DAVE
EMAIL ME PERSONALLY if interested at all4trux@snip.net

sorry, but how do you know if you need 1.50 or 1.60 i have a 383 stroker and 2.02 camel back heads.

matt

1.5 was stock on all small blocks. the 1.6 makes your cam bigger.
it will add .030 lift to a .450 lift cam a few degrees of duration. has nothing to do with CID of engine or heads really. It's a multiplication factor. 1.5 times your LOBE lift or 1.6 try it with 300 lobe lift and you'll see the numbers i just posted . .450 vs. .480 .

then if you take the stock cam of appx. 266 lobe lift and multiply you get the added .025 of lift , stock is appx .400 lift and these will make it .425 with a few added degrees of duration.
on my 305's it added about 400 useable RPM. no bull. DAVE

sold
 

Sold, thanx todd