The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Picture of my new 69 C20 (https://67-72chevytrucks.com/vboard/showthread.php?t=55440)

ddsmith 06-04-2003 09:22 PM

Picture of my new 69 C20
 
As requested here are some pictures. Unfortunately the weather still stinks. Most shots are from the undercarriage. I'll post more later when the weather gets better.http://community.webshots.com/sym/im...9VUsidQ_ph.jpg http://community.webshots.com/sym/im...9QzThdg_ph.jpg http://community.webshots.com/sym/im...0XuUKJM_ph.jpg http://community.webshots.com/sym/im...2MapYQO_ph.jpg http://community.webshots.com/sym/im...5fhQHTp_ph.jpg

Longhorn Man 06-04-2003 10:38 PM

Webshots won't host pics these days. Eve so, with my secret decoder ring I can see that it is a green fleet truck with a nice underside and leaf springs. ;)

I use http://www.digitalpose.com/ for my pic hosting these days.

Gee_Emm 06-04-2003 10:47 PM

Hey is that the one from ebay a while back?

Whats with all the underneath pictures? :p

toms68cst 06-04-2003 11:22 PM

Well, The underside looks pretty nice! Nice anti-sway bar.

ddsmith 06-05-2003 12:36 AM

Sorry about the pictures. It's getting hard to find a free picture host. Thanks Longhornmail for the link. I'll try and use them for future pictures. It was such a rotten day outside that I figured I would take the underside pictures. This truck was west coast all it's life in California and Oregon. Now I'm going to torture it to the Northeast US. I'll post some nice body shots when the weather gets better. Gee-Emm that is the one from E-bay that I bought. It is pretty much rust free with a few small exceptions. The bottom of the door is rusty you know the spot where the drain holes are. You can see it if you have Longhornmails special webshots decoder ring. Unlike some fellow board members I plan on keeping this truck at it's current height, with the original wheels, and only plan small upgrades. Maybe a HEI since I have a spare laying around. The dash has already been molested for the installation of an eight track, cb, and radio all in one unit. That has to go. The A/C compressor is gone and I'm going to have to decide whether to try and put the original all back or go with an Old Air one from GMC Pauls. The ventilation control panel seems like it needs some attention. At least I welded up the alternator bracket that broke today and installed it during the rain breaks. I found the build sheet under the seat today. It was in pieces but it was there.

Gee_Emm 06-05-2003 09:06 AM

Good to hear

Time to flush out all those drain holes in the fenders, cowl, bed, doors :p


All times are GMT -4. The time now is 05:33 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com