Please pics of 3.5''-6'' drop....
 

I'm getting ready to drop my 70 and not sure what way to go. I will run 18's and 20's...i must have a flat even drop...so any help would be great...

Re: Please pics of 3.5''-6'' drop....
 

http://67-72chevytrucks.com/vboard/a...501.......THIS IS STOCK NOW...

Re: Please pics of 3.5''-6'' drop....
 

I know it's not what you asked for but here's a shot of my 4.5/6" drop running 20's front and rear.

More info about the build by clicking "Blank Slate" in my signature.

Attachment 1021068

Re: Please pics of 3.5''-6'' drop....
 

I love that truck!!!

I would recommend ECE all the way. :)

Re: Please pics of 3.5''-6'' drop....
 

Early classic enterprises 4-6 drop is great. Add a half in drop block to even it out. Highly recommend ece
Posted via Mobile Device

Re: Please pics of 3.5''-6'' drop....
 

Ece is great. Used their 4/6 kit for mine.

http://i1182.photobucket.com/albums/...24c1b949e4.jpg
Posted via Mobile Device

Re: Please pics of 3.5''-6'' drop....
 

Great looking truck
Posted via Mobile Device

Re: Please pics of 3.5''-6'' drop....
 

Thanks! This pic was as we were loading it up to go to the glass shop last week. Should be buttoning everything up tomorrow. Early classic enterprises made the suspension a snap converting from c20 to c10.
Posted via Mobile Device

Re: Please pics of 3.5''-6'' drop....
 

Nice, just noticed your local too maybe I'll see it around
Posted via Mobile Device

Re: Please pics of 3.5''-6'' drop....
 

Hey, whatta ya know! Say hi if ya see me cruising or at a show.
Posted via Mobile Device

Re: Please pics of 3.5''-6'' drop....
 

Great looking truck packsand, that will look nice w/ a 4/6 drop.

Re: Please pics of 3.5''-6'' drop....
 

I think you are right...I will just add a little to the back to even out...I don't want to cut the frame..will this give me enough room not to bottom out.

Re: Please pics of 3.5''-6'' drop....
 

http://67-72chevytrucks.com/vboard/a...1&d=1354475228 So a little chop and a little heat and getting there to see how it will look...I will order the kit soon..

Re: Please pics of 3.5''-6'' drop....
 

Mine is a 3/5 from CPP. Might go a little lower in the front.

Re: Please pics of 3.5''-6'' drop....
 

Yes, check out member original 71 he has the kit with a 1/2 block in the rear. Looks great and no frame mods just cut the bump stop a bit
Posted via Mobile Device

Re: Please pics of 3.5''-6'' drop....
 

What size wheels and tires are you running Jarwood? Could you post more pics? Thanks

Re: Please pics of 3.5''-6'' drop....
 

I'm running 245/45/20 on front and 295/40/20 on rears.

Re: Please pics of 3.5''-6'' drop....
 

Nice truck jarwood!

Re: Please pics of 3.5''-6'' drop....
 

I also have the ECE kit but I had them give me the shorter front spring which makes the kit 4.5/6

I'm not using a c-notch but I wish I was. It doesn't happen often but it bottoms out when I hit a dip too quickly.

Re: Please pics of 3.5''-6'' drop....
 

18's and 20's on my truck.
http://i32.photobucket.com/albums/d3...824_212236.jpg

Re: Please pics of 3.5''-6'' drop....
 

Very nice truck shopking
Posted via Mobile Device

Re: Please pics of 3.5''-6'' drop....
 

Here is a 5/7 drop so you get another idea.
Attachment 1036817

Attachment 1036818

Re: Please pics of 3.5''-6'' drop....
 

Thank you 72 BLckButy

I havent had much time to work on the last few months. But everytime I get on here it makes my blood start pumping to get busy! The support on here from all the members and friends is great.

James

Re: Please pics of 3.5''-6'' drop....
 

2-1/2" drop spindles with 1/2 of a coil cut off of new 3/4 ton (big block) springs and 5" drop coils with shock relocators and adj track bar...on 15's.