The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 99-06 GMT800 Chevy and GMC Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=58)
-   -   Factory CC in 2002 4.3L W/T (https://67-72chevytrucks.com/vboard/showthread.php?t=555796)

Mr onetwo 12-11-2012 11:26 AM

Factory CC in 2002 4.3L W/T
 
I have just purchased a 2002 Chevy 1500 W/T with the 4.3L V6.I am an amputee and it is important to have cruise for any trip over a 1/2 or so.I saw the cruise FAQ for LS engines but I am not sure if it applies to the 4.3L.I am hoping that I can just get the right lever and modules at a junkyard and hook this up.Can anyone help me out with this question?Thanks in advance!:confused:

gmclowsierra 12-11-2012 10:30 PM

Re: Factory CC in 2002 4.3L W/T
 
Should be able to change the turn signal switch and have the ecm reflashed by the dealer to add cruise control.
Posted via Mobile Device

clinebarger 12-12-2012 09:51 PM

Re: Factory CC in 2002 4.3L W/T
 
No ECM reflash needed.
You need a Cruise Module & cable, & a Cruise multi function switch. The Module plug will have a "cap" over it, But is there.

Not just any module will work, Stick with a 99-02 trucks for a doner. The Module part # is 25315559.

Mr onetwo 12-13-2012 06:36 AM

Re: Factory CC in 2002 4.3L W/T
 
Quote:

Originally Posted by clinebarger (Post 5755151)
No ECM reflash needed.
You need a Cruise Module & cable, & a Cruise multi function switch. The Module plug will have a "cap" over it, But is there.

Not just any module will work, Stick with a 99-02 trucks for a doner. The Module part # is 25315559.

Thank you very much for your help!I was hoping for a specific answer like this.


All times are GMT -4. The time now is 06:58 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com