![]() |
Windshield Gasket
Will a 1970 windshield gasket fit a 1972???? LMC catalog says chevy 67-70 & 71-72. Gmc 67-72.
|
Re: Windshield Gasket
Please don't buy a gasket from them. Buy a precision gasket. They are so much better. Just put a new windsheld in my 72 fit like it should. Nice and soft.
|
Re: Windshield Gasket
i think lmc must use a couple diferent vendors i bought one 2 years ago and it fit and looks good still but i cant say that for some of the other items i got from them
|
Re: Windshield Gasket
67-72 have the same windshield in them. Where the difference comes in if the truck has chrome trim in the gasket or not. 67-70 had a deeper leg on the chrome piece, while the 71-72 had a shallower leg on the chrome. If no chrome present then a WBL 685 ordered from Precision you will be all set.
|
Re: Windshield Gasket
What Terry said. Save yourself a lot of grief...buy precision.
|
Re: Windshield Gasket
I used LMC back window and door gasket's. No comparison to precision.
|
Re: Windshield Gasket
Lmc+no no.... Buy Precision,. think I got mine in a real good kit from GMC Pauls
|
Re: Windshield Gasket
Anyone help with a link to Precision mentioned in this thread - searching on Google is bring up a few different companies. Thanks
|
Re: Windshield Gasket
I have 4 in stock. $39.95 plus the ride. WES
|
Re: Windshield Gasket
my door gaskets that i bought from lmc are all cracked up (bad) i guess i got lucky on the w/s gasket it realy does fit good inside and out and no cracks or leaks
if i would have known that their quality was so bad i wouldnt have bought from them |
Re: Windshield Gasket
Thank You everyone especially 68johndeer. I will buy precision. Can anyone give me their web address.
Thanks |
Re: Windshield Gasket
Hey wes,
Are your gaskets precision?? |
Re: Windshield Gasket
anyone know what brand windshield gasket that Classic Parts carries??
|
Re: Windshield Gasket
Classic Parts does not have Precision Seals. WES or GMC Pauls, carry Precision Seals and as mentioned, they work well.
Jim |
Re: Windshield Gasket
if you are running the chrome strip in the gasket you need to know if it is 67-70 or 71 up because the lip on the chrome is different. However if you have the correct gasket for the trim you are using it will fit any 67-72. Ditto on everyone else's response only use precision seals lots of soapy water and patience when installing it!
|
All times are GMT -4. The time now is 04:14 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com