The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   AR 67-72 Black powder coated upper/lower control arms (https://67-72chevytrucks.com/vboard/showthread.php?t=558104)

1968Mann 12-28-2012 07:34 PM

67-72 Black powder coated upper/lower control arms
 
1 Attachment(s)
Factory 67-72 upper and lower control arms. These have been blasted and powder coated satin black. They also include brand new cross shafts and 73-87 ball joints. They are in great shape and look brand new!

First I take it gets them.

$335.00 shipped to your door! (Extra fee may apply for to NE or west coast.)

BALL JOINTS ARE FOR 1973-1987 TRUCKS!

SOLD!

1968Mann 12-28-2012 10:20 PM

Re: 67-72 Black powder coated upper/lower control arms
 
Posted via Mobile Device

IAFF2407 12-29-2012 02:50 AM

Re: 67-72 Black powder coated upper/lower control arms
 
If these work for my '72 and the control arms haven't ovaled out, I'll take them. Shipping will be to 98230, Blaine, WA
Thx,
Al
Posted via Mobile Device

1968Mann 12-29-2012 12:27 PM

Re: 67-72 Black powder coated upper/lower control arms
 
From my understanding these should work fine for a '72. They do not seem to be ovaled out where the springs sit. They are a very solid set from what I can tell. They were for my project but I have turned a different direction with it so these have not even been put on a truck yet.

Zack

Classic Heartbeat 12-29-2012 01:10 PM

Re: 67-72 Black powder coated upper/lower control arms
 
63-70 Ball joints and control arms are the same. 71/72 are different. The 72 bumpstops allow for sharper turning, and the ball joints are larger. Now that being said, you can use the 63-70 control arms, but the ball joints will not work. You would have to change the ball joints to 71/72. WES

1968Mann 12-29-2012 01:35 PM

Re: 67-72 Black powder coated upper/lower control arms
 
Thank for clearing that up wes! I am glad you said something. The ball joints are for a 73-87 truck so they will npt work with factory 72 spindles is my understanding. I bought a truck full of stuff from CPP and the drop spindles they use are for a 73-87.

Thank you wes for saying something! I really do not want to screw anybody!
Posted via Mobile Device

IAFF2407 12-29-2012 01:49 PM

Re: 67-72 Black powder coated upper/lower control arms
 
Quote:

Originally Posted by Classic Heartbeat (Post 5783587)
63-70 Ball joints and control arms are the same. 71/72 are different. The 72 bumpstops allow for sharper turning, and the ball joints are larger. Now that being said, you can use the 63-70 control arms, but the ball joints will not work. You would have to change the ball joints to 71/72. WES

That's what I was thinking, thx Wes. Zack, when I said "ovaled" I meant where the shafts went into the A-arms, if they are worn and did they have any play. I have some '72 ball joints so as long as they are '72 arms I'm good with them. Did you want to keep the ball joints?

I'll still "take them"

pm coming your way

thx,
Al.

1968Mann 12-29-2012 03:45 PM

Re: 67-72 Black powder coated upper/lower control arms
 
Sold.
Posted via Mobile Device


All times are GMT -4. The time now is 12:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com