![]() |
fixed tilt wheel, now steering wheel upside down
Hi all,
I'm new to the forum. I have a 1991 Blazer and I had the notorious tilt wheel issue with my steering column. Long story short, I repaired the tilt wheel and reassembled everything. Now after I finished putting everything back together, the steering wheel is virtually upside down. I didn't turn the wheel during the install and it only fits on one way, so I'm extremely confused. Am I missing something? I don't think a wheel alignment is going to fix this issue. Jon ps, here's a photo of the truck https://sphotos-a.xx.fbcdn.net/hphot...79091828_n.jpg |
Re: fixed tilt wheel, now steering wheel upside down
ive done a few tilt fixes and they always seems to be out a little after and a alignment will fix it, but to me it sounds like something moved.
|
Re: fixed tilt wheel, now steering wheel upside down
Did you take the upper shaft completely out of the housing were it pivots? If so you put it back half a round off.
|
Re: fixed tilt wheel, now steering wheel upside down
4 Attachment(s)
my 78 the coupler was reversed and did that
havn't fixed it,don't think i turned the lower shaft but it's made opposite i was told it's never happened before from doorman |
All times are GMT -4. The time now is 04:23 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com