The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   All 4x4 Tech & Off Roading (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=30)
-   -   transfer case gear range positions (https://67-72chevytrucks.com/vboard/showthread.php?t=561407)

coldgin 01-18-2013 12:52 AM

transfer case gear range positions
 
I have a 69 3/4 ton with a transfer case from a 72 truck...I am needing to know the gear range positions for that transfer case...I am thinking it is this starting towards the front of truck going towards the seat...
4L
4H
N
2H
I have never had to use it and got to thinking I better find out if I need it..i know pulled back towards the seat is where I have always seen it stay...

SS Tim 01-18-2013 01:26 AM

Re: transfer case gear range positions
 
No

The later NP205 (69-72)
4 Low
Neutral
2 High
4 High


The earlier T221 (67-69)
2 High
4 High
Neutral
4 Low

coldgin 01-18-2013 10:31 AM

Re: transfer case gear range positions
 
thanks tim....I wasn't sure...the glovebox has the decal on it still from the factory for the old t221 and it is labeled just like you laid it out...the 4 speed came out years ago and got retrofitted with a 700r4 with the 205 case...

wayne4252004 01-20-2013 06:03 PM

Re: transfer case gear range positions
 
Is the gear ratios in a T221 and NP205 different?
Thanks,
Wayne

SS Tim 01-20-2013 06:23 PM

Re: transfer case gear range positions
 
Barely.

T221 1.94 & 1.00:1
NP205 1.96 & 1.00:1
Dana 20 2.03 & 1.00:1


All times are GMT -4. The time now is 05:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com