1972 one ton for parts
 

1972 one ton factory red with blue trim. it`s seen better days but still has a few pieces left on it.
sunvisors $30
radio delete $25
floor shift non tilt column $30 (wheel not included)
glove box door $25
original jack bag $30
cluster $25
cab lights w/harness $25 the harness has some bare spots
a/c controls $40
interier a/c vents $40
seatbelts, missing one female belt for third person $50
custom 30 emblems $25
deluxe emblems $10
350 emblems $5
clutch & brake pedals $25
clutch rods, z-bar, frame bracket $35
core brake booster w/brackets $35
sm. blk. v-8 stands $25
outer a/c housing (not rusted) $50
a/c wiring harness $45
sway bar 1-1/16" with brackets $40
4 spd. high hump $25
i`ll take it, gets it
prices are plus shipping

Re: 1972 one ton for parts
 

few more pics

Re: 1972 one ton for parts
 

I'll take the Custom/30 emblems. How are the doors? The driver's door is what I need.

Re: 1972 one ton for parts
 

Front bumper any good?
Posted via Mobile Device

Re: 1972 one ton for parts
 

Are the cab lenses any good (free of cracks)?

Re: 1972 one ton for parts
 

Are the front coil springs in good shape? How much shipped to 46562

Re: 1972 one ton for parts
 

Interested in cluster pending pics...

Re: 1972 one ton for parts
 

Also interested in bumper bolts if in decent shape...

Re: 1972 one ton for parts
 

i would be interested in the whole dash panel, if uncut or drilled. dont need the cluster, heater controls, dash pad or GBox door. would like the a/c vents, ignition & key, both ign and lighter bezels. shipping to 48001
p.s. dont need radio delete or ashtray either

Re: 1972 one ton for parts
 

I need the section of the air box under the dash that mounts to the firewall (the part that holds the heater core).

What kind of shape is it in?
How much?

Re: 1972 one ton for parts
 

Interested in the ac wiring harness pending pics~thanks, Tony

Re: 1972 one ton for parts
 

Any pics of front sway bar thanks Brian
Posted via Mobile Device

Re: 1972 one ton for parts
 

interested in radio delete. is that price shipped?

Re: 1972 one ton for parts
 

How much for the brake proportioning valve and lines from the prop valve to the frame?
Posted via Mobile Device

Re: 1972 one ton for parts
 

interested in locks, ignition and key if they work well and 1 key works them all...

Re: 1972 one ton for parts
 

would the core booster and brackets mount to a 69 3/4?
I have manual drums all around...So I need everything to switch to power drum all around...



betty

Re: 1972 one ton for parts
 

i forgot to add that all prices are plus shipping
special-k- hey Tim, the drivers door has some rust on the bottom front, i`m sure more would show up if it was blasted. i`ll get a total on the emblems.

tjmeadows- front bumper is bent

nybela- i`ll check tomorrow

70stovebolt- $50 plus shipping on the springs, but they will be one of the last
things that i take off. i need to keep it rolling until i get on the trailer

deadheadnm- hey Pete, i`ll get some better pics of the cluster and bolts

nobolt- hey Dave, sorry but i`m keeping the dash panel. i have medium red 71 cheyenne with a big square hole where the radio goes and this is going to fix it. if you still want the a/c vents, ign switch, and cig. bezel $55 plus shipping.
the ign key doesn`t fit the doors.

bigred76- $20 plus shipping. if it`s good. i`ll let yo know when i get it out.

tdkosta- pics tomorrow

brian1971- pics tomorrow

brian atkinson- shipping is useally about $2-$3 dollars

wideside72- $25 plus shipping

budnikguy-the key only works the ign switch

flchevygrl- hey betty, i have a core 69-70 booster for the same price

Re: 1972 one ton for parts
 

i'll pass on the rest of the stuff. i'm looking for an a/c dash for the wall and i already have some stuff to fill the holes. thanks

Re: 1972 one ton for parts
 

my son is looking to change the parking brake on his 68 to the foot pedel type. how much for yours? thanks for the time Steve

Re: 1972 one ton for parts
 

here`s more pics
pete , i`ll have to take more of the cluster . the ones i took this morning didn`t come out

sstaten69 $20 plus shipping for the handle and cable that goes under the cab

Re: 1972 one ton for parts
 

and a few more

Re: 1972 one ton for parts
 

last ones

Re: 1972 one ton for parts
 

No rush on my end. Thank you! I'm curious if the oil pressure gauge is an 80 lb piece as that's what I'm after. Thanks, Pete

Re: 1972 one ton for parts
 

What shape are the a/c hoses? How much shipped to 77039 thx
Posted via Mobile Device

Re: 1972 one ton for parts
 

? $ on cab lenses to California