no shipping parts
 

few parts for pickup only

1. 67 complete crossmember.$50

2.71 lwb frame body mount brackets have been cut off but I have them $100

3.six lug 12bolt 373 open rear from my 67(narrow) $50

4.4 6 lug steel wheels 15x6 tires hold air but they are cracked $25

5. 71 disc brake spindles and rotors $30

6. lwb stepside bed sides these are a lil' rough but very fixable $75

7.lwb step side steps$25

8.lwb drive shaft from the above frame that had a 292/t350 $25

9. 2 front painted bumpers has a few bumps along bottom edge $20 a peice

10.rear fleetside chrome bumper... sold:lol:

11. not pictured but I have a pretty decent rear slider the latch is broke and some of the seals are crack but the frame and overall it is very nice $40... sold

12.90's flairside short bed (seen off too the side) $250....sold

as usually if somebody shows up out here in the outer realm I'll make'm a deal on some or all

Re: no shipping parts
 

ttt

Re: no shipping parts
 

ill take the sport bumper pending better pics and if you will ship 07981

Re: no shipping parts
 

Keith
can you send me some better pictures of bumper and bedsides (see if they are better then what i have) to email ill PM you i did the map quest looks like just under 2 hr ride in the country i can do it 1.5 :) get to meet you and who knows could make a deal thanks
Jess
ps looks like steps are LWB?

Re: no shipping parts
 

yep the sides and steps are lwb I have a few pics of the bedsides but really thats the only one i have of the bumper rite now i'll shoot some more of the bumper an chuck'm up later for now i'll chuck up the ones of the sides here for now

Re: no shipping parts
 

the rear bumper is pretty clean except the hole for the trailer harness thing and some indentations around the bolts allthough they are not bad the chrome isnt real bad at all but isnt perfect and i never really checked it out too see if it could be cleaned up too look nice i'll give it a rubbin when i get the pics too see
also i'm not sure if if it is oem or not the back side is super clean and silver almost too clean too be a 40 yr old bumper

the sides are a lil' rough but very fixable here are some rust holes through the sides around where the fenders bolt too but i'm pretty sure the fender holes themselves are good i rememeber that a end or two on the sides the weld popped off where they curl around too the stake pockets the steps are soild except the bottoms are a lil' dented and of course they are cracked in the front corners like most of them are
i gotta go for now but i'll be back later this evening with more pics and info

Re: no shipping parts
 

ill pass on the bed sides looks like the bumper has another hole in he right bottom?

Re: no shipping parts
 

after digging the bumper outa the sh*it house I wiped it off and yeah its scratched up pretty good I never payed much attention too it and didnt realize the extra holes on the bottom(one on each side) I must say though there is only one small dent up above the plate its been in my out house for about 7-8 yrs the kid an i were gonna fix it up years ago sand off the chrome and paint it but we found a good painted one for his truck and forgot about this one

Re: no shipping parts
 

thanks for the extra pics ...if i could get out there to take a look i would I am tied up with ongoing Sandy repairs and then business travel until march 1st if its still available when i return i will try to get out to take look

Re: no shipping parts
 

If you plan too travel out too spring carlise that would be a good time too stop by I'm kinda on the route too there.I do plan too go too carlise but not sure if i'm going fri or sat

Re: no shipping parts
 

Midnight, in dire need of a trailing arm; ever find any? decent shape? how much?

thanks, Wagz

Re: no shipping parts
 

awe man i havent recieved the ones i've been waiting on yet. they are one of the last things i need too finish peiceing the frame together on this side project from these no shipping parts:lol:

i think member isshallky might have some in one of his f/s threads but i'm not sure if he still has'm

Re: no shipping parts
 

I'm bumping this up for you guys going to spring carlise.
i'm about an hour east from there.I'll be there sat with the crowd searching for parts:lol:.
i dont think my kid is going an he's got access to everything he can help you here and be in contact with me.
there is alot of parts/peices here,alot thats not shown bring offers if something intrests you.

Re: no shipping parts
 

bump

Re: no shipping parts
 

Do you still have the newer step side bed? What shape is it in? Could I see a few pics of it? Thanks

Re: no shipping parts
 

yep the bed is still here currently in my yard filled with scrap so i dont have any pics of the floor rite now.

lil' info on it

this was on my 67 when i bought the truck so its had the second too last rear crossmember underneath trimmed to fit a 67-72 frame it has the tail lite harness still attatched to plug rite into the oe 67-72 harness an all the lights worked.4 hockey pucks were used as rubber mounts/spacers between frame and bed witch lined it up great with the body the orginal bolt holes in the bed lined up with the 67-72 bed mounts on the frame an i still have the pucks n bolts that were used.

the bed is painted a satin black idk what kinda paint is on it but i'll tell ya its tough too scratch an it dosnt look bad at all if black is your thing.

since this was a big tub stitting useless in my yard all the scrap i generated over the winter got loaded into it but i gotta say the crap wasnt tossed in it as to damage anything.

now onto the damage....well its got a few small dents but they are very minor no bigger than a half dollar.it has the leftover snaps from a tonno cover that must've been on it at one point in time. and the worst part of the bed is the dr side front step is missing a panel between the cab and bed its really not visable when the bed is mounted but you wouldnt wanna use that one to bare body weight on it without fixing it because it would flex too much this peice looks very easy to make.

the good thing about it is theres not one speck of rust on it besides the rust dust dripping from the crap that just wipes off that paint.it lines up good with the body and because it came off my truck its a direct plug n bolt on.

Re: no shipping parts
 

hers a pic of the missing peice. and when it was on my truck you can see it lined up good

Re: no shipping parts
 

Hey Midnight,

Is the chrome sport rear bumper still available? I know zicc said that he was interested in it...if he didn't take it, I'll get in line for it.


Thanks!



Chris

Re: no shipping parts
 

yhea its still here i've had alot of intrest in it but that dang trailer plug seems to kill the deal..:lol:
its pretty nutty that somebody went through the trouble to cut that hole in it when they couldve just bolted it on the bottom. oh an the second tag box is still here for it also(in my other f/s thread)

Re: no shipping parts
 

Hey Midnight,

I don't really mind that it has the trailer plug in it...I'll take it. I'd have to see the plate bucket in person.

You aren't very far into PA...I'll come out and pick it up some weekend. I assume that Paypal will be okay? $40, then?

Re: no shipping parts
 

i'm about 30-45 min from the nj line. and a 1/4-1/2 mi. off pa. 78 witch i think might run rite near you. i dont think its too bad of a ride if you have the time an a gas savey ride.
i dont mind holding it for ya here after all its been out there in the s.h for quite awhile already:lol:

yep $40. ya want my pp addy?

Re: no shipping parts
 

Hey Midnight,

I've been out 78 a bunch of times...I know it pretty well!

I'm the one that bought the bumper brackets, so I already have you Paypal info.

I don't know that I'll get out there this weekend...but sometime soon.


Thanks!


Chris

Re: no shipping parts
 

Hey,

I just sent the $40 for the bumper.


Chris

Re: no shipping parts
 

you know i missed the po on sat. to ship these brackets. i totally forgot i was taken the lil' one too a fishing rodeo sat morning.

but i'm taken them over here in a few min. too ship'm;)

i'll edit the thread and pm my # when i get the track # for you. then you could text or call whenever your ready.

oh btw, i'm getting married this weekend so its not any good for me either:lol: thanks chris

Re: no shipping parts
 

Hey Congrats!

I'll be in touch for when I can take a ride out your way.


Thanks!


Chris