The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Our Stuff... In Scale (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=142)
-   -   Building my Jimmy to scale (https://67-72chevytrucks.com/vboard/showthread.php?t=564380)

hgs_notes 02-03-2013 09:57 PM

Building my Jimmy to scale
 
Not really a jimmy though. Can't afford the GMC grill, so it will have to be close enough. The jimmy isn't done yet, but getting closer. I bought this boondocker partial built model a while back. Started re-doing it last winter, but at the time I was using the model to try out different colors for the jimmy. Now I have the color, the chassis is pretty much done, so I sprayed the model with the real jimmy paint and can finish up the model anyway.
http://i108.photobucket.com/albums/n...ps09c3f39f.jpg
http://i108.photobucket.com/albums/n...ps9825b842.jpg

Not sure if you can tell in the pics, but I did sand the ridge off the hood like the one I built for the jimmy. I also sanded the side molding off the tub. I did not cut the bottom of the fenders though because I'm not sure what I'm doing for a bumper yet. Like I said, not exact replica, but it'll be similar. I should try to find some aluminum slot type wheels for it.

DirtyLarry 02-05-2013 11:31 AM

Re: Building my Jimmy to scale
 
Neat!

hgs_notes 02-05-2013 04:03 PM

Re: Building my Jimmy to scale
 
Detail painting...

http://i108.photobucket.com/albums/n...psd2396004.jpg
http://i108.photobucket.com/albums/n...ps9ec0c45c.jpg
http://i108.photobucket.com/albums/n...psb10782e1.jpg

hgs_notes 02-05-2013 11:57 PM

Re: Building my Jimmy to scale
 
I finished it up today. I think it turned out pretty good. One of my better efforts anyway.
http://i108.photobucket.com/albums/n...pse2e76fb4.jpg
http://i108.photobucket.com/albums/n...psd3069a27.jpg
http://i108.photobucket.com/albums/n...ps4de8dad6.jpg
http://i108.photobucket.com/albums/n...ps60ce23f5.jpg
http://i108.photobucket.com/albums/n...psd18eaa89.jpg
http://i108.photobucket.com/albums/n...ps44273c13.jpg
http://i108.photobucket.com/albums/n...ps8b12c066.jpg

Desert.Chevy 02-18-2013 08:06 AM

Re: Building my Jimmy to scale
 
Nice.
Posted via Mobile Device

justcuz 03-04-2013 08:42 PM

Re: Building my Jimmy to scale
 
For real fine stuff I use a toothpick. I've even chewed on the end to make a little brush to paint stuff like the holes in the rear where the backup lights would be! One time use only, chew it a little, let it dry, paint and discard.

mikeLekan 03-05-2013 01:57 AM

Re: Building my Jimmy to scale
 
nice, is it done already?


All times are GMT -4. The time now is 04:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com