The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   Wiring the dome light (https://67-72chevytrucks.com/vboard/showthread.php?t=565013)

62lwbc10 02-07-2013 09:41 PM

Wiring the dome light
 
Hey guys got a new dome light assembly and wondering where/how the wires are routed and where do they connect to the larger harness? THe two wires the came with the assembly are rather short (maybe 2 feet?). WHere exactly do you route the wires? !?!?!?

THanks in advance ,
mark

OrrieG 02-07-2013 10:47 PM

Re: Wiring the dome light
 
Go to the top and search for wiring harness, diagrams were posted last week. I cannot a,cess them here.
Posted via Mobile Device

_Ogre 02-08-2013 01:17 AM

Re: Wiring the dome light
 
wires route down thru the windshield pillar
i used plastic pallet strapping to fish down the pillar and pull the wires up
hook up is the same as all dome lights, 12v up and ground on at the headlight switch
if you want door switches look in my build for hinge mounted switch brackets

http://i306.photobucket.com/albums/n...0409011819.jpg

62lwbc10 02-08-2013 01:43 AM

Re: Wiring the dome light
 
Ogre thanks, Practically speaking, what is the process? I assume I need to first snake the wires that connect to teh headlight switch up the pillar, over the door and then down somewhere by the gas tank filler area. THen snake the wires from the actual dome lamp assembly down the back of the cab around the window and then down by the gas tank filler to connect with the wires from the headlight? How the heck do you do all this snaking??

Daze57 02-08-2013 03:57 AM

Re: Wiring the dome light
 
you can use a fish tape and tie new wire on it and work it thru -- i used a medium/soft wire and just took my time and worked it thru . patience (like most stuff ) is the key.
my wires travel from light switch up the pillar and across the left side of the roof and i pick it up as it makes the corner to he dome light ------good luck and patience my friend.

_Ogre 02-08-2013 12:59 PM

Re: Wiring the dome light
 
nope. just fish the wires up the pillar and tuck them in the crack between the inner roof and outer roof.
use the same fish strap to get the wires behind the dome light
i cut the wires on the dome light short so that the butt splices are near the dome light
i didn't have the headliner rubber in when i did this
no reason to fish the wires down to the filler neck, i don't think that is possible with a big back window either

OrrieG 02-08-2013 02:31 PM

Re: Wiring the dome light
 
1 Attachment(s)
Here is the switch wiring diagram I could not access last night.

62lwbc10 02-09-2013 10:14 PM

Re: Wiring the dome light
 
Thanks Orrie and Ogre and Daze. And I thought the dome light assembly would be easy....


All times are GMT -4. The time now is 11:51 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com