The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Upgrading Master Cylinder? (https://67-72chevytrucks.com/vboard/showthread.php?t=565046)

school boy

02-07-2013 11:58 PM

Upgrading Master Cylinder?

I just finished parting out a 95 2500hd and getting ready to hual off the scrap. im sitting here looking at the master cylinder and curious if i used it on my 86 c10, would it help with stopping power?
Thanks:smoke:

andrewmp6

02-08-2013 09:20 AM

Re: Upgrading Master Cylinder?

Depends on the bore size vs what you have and if it will even bolt on your truck or not.

school boy

02-08-2013 10:16 AM

Re: Upgrading Master Cylinder?

from what i read so far 1/2 ton, 1 1/8 bore, 3/4, 1 1/4 bore, 1 ton, 1 5/16. im not sure on bolting up properly.

All times are GMT -4. The time now is 10:31 AM.