The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   How low to go? (https://67-72chevytrucks.com/vboard/showthread.php?t=565817)

Sleeperc10 02-12-2013 07:30 PM

How low to go?
 
Hello everyone,

I have a 72 c10 short bed and wanted to know how much of a drop I can do front and back without a c-notch etc. :ito: I want it to feel a bit sportier and handle better than say a newer car. :uhmk:

jsbgump 02-12-2013 07:36 PM

Re: How low to go?
 
2.5/4 would be the best but will also require a rear shock relocator setup and adjustable panhard bar

PanelDeland 02-12-2013 09:52 PM

Re: How low to go?
 
You'll also want to add a later model 3/4 ton sway bar.You'll have to grind off the rivets holding the brackets to get them off the donor truck but everything can be bolted back on.You're probably not going to get "handle better than a newer car" but you will notice a difference.


All times are GMT -4. The time now is 03:57 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com