The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Transmission lines (https://67-72chevytrucks.com/vboard/showthread.php?t=565873)

jeh 02-13-2013 12:45 AM
Transmission lines
 
Any ideas on tranny lines on a 70 c-10 w/big block and 700r4??? Pics would help also
Posted via Mobile Device

BrutonLS1 02-13-2013 03:13 AM
Re: Transmission lines
 
Get some metal lines, a bender, thread tape, and a flaring tool. Use a coat hanger and a measuring tape to figure your angles. My 700r4 Dynoed with 120psi at idle and 260psi at wide open throttle.
Posted via Mobile Device

PAWS 72 02-13-2013 03:23 AM
Re: Transmission lines
 
Quote:
Originally Posted by BrutonLS1 (Post 5885840)
Get some metal lines, a bender, thread tape, and a flaring tool. Use a coat hanger and a measuring tape to figure your angles. My 700r4 Dynoed with 120psi at idle and 260psi at wide open throttle.
Posted via Mobile Device
Dumb question but why does it drop?


All times are GMT -4. The time now is 05:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com