The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)

- - CA WTB Blue patina pass fender (https://67-72chevytrucks.com/vboard/showthread.php?t=567687)

perro13

02-23-2013 11:30 PM

WTB Blue patina pass fender

looking for a pass side fender or maybe both. doesn't have to be perfect, dents, rust welcomed, as long as it matches my suburban or close enough. i can buy or trade parts.
http://i275.photobucket.com/albums/j...psed75d862.jpg
http://i275.photobucket.com/albums/j...psc638d08a.jpg

perro13

02-25-2013 05:16 PM

Re: WTB Blue patina pass fender

anyone

1963c-10

02-25-2013 05:31 PM

Re: WTB Blue patina pass fender

2 Attachment(s)

I have one that came on my 61 parts truck. Was the same color blue from the factory. I will get a picture tomorrow when I go over there. Has the usual lower rust issues. Here are some pics prior to disassembly.

perro13

02-25-2013 05:34 PM

Re: WTB Blue patina pass fender

Quote:

Originally Posted by 1963c-10 (Post 5912124)

I have one that came on my 61 parts truck. Was the same color blue from the factory. I will get a picture tomorrow when I go over there. Has the usual lower rust issues

Perfect, get me pics , price or trade.

1963c-10

02-25-2013 05:39 PM

Re: WTB Blue patina pass fender

Id be fine w/either. Its probably only worth $75 with the work that it needs. Only a few parts im looking for....factory radio & knobs, oem custom choke & throttle cable knob... pass door and i need a decent inner fender, I believe pass side. Id have to look at home. I picked up a set, but one was no good, just dont remember which. And a hood, but that will have to wait til I have some extra cash. Let me know what you have or if cash would be easier, and id like to get some pics of the fender and look at the condition a little better for you. Ill be there at 5pm est tomorrow, so it'll be wednesday before I get back to you. Jon

perro13

02-25-2013 05:45 PM

Re: WTB Blue patina pass fender

i have some of the parts listed, wait for pics

1963c-10

02-26-2013 10:27 AM

Re: WTB Blue patina pass fender

Noticed the tow hooks on your suburban...I have a set...can you give me some measurements for mounting? Just need to know where to drill

perro13

02-26-2013 10:42 AM

Re: WTB Blue patina pass fender

Quote:

Originally Posted by 1963c-10 (Post 5913802)

Noticed the tow hooks on your suburban...I have a set...can you give me some measurements for mounting? Just need to know where to drill

get some later today

1963c-10

02-27-2013 09:21 AM

Re: WTB Blue patina pass fender

Had a real bad rain storm here last night, I wasn't able to make it out there to get pics. I will be there again tomorrow and the weather looks better for tomorrow.

1963c-10

03-04-2013 01:59 PM

Re: WTB Blue patina pass fender

2 Attachment(s)

Havingtrouble uploading from my phone to the computer...have tried several times...I wil post them as i get them loaded. Im trying to resend them. Both fenders will need rear supports. The pass fender has some blistering on the botttom front corner and some work on the lower rear. The driver side has work on lower rear

1963c-10

03-04-2013 02:33 PM

Re: WTB Blue patina pass fender

1 Attachment(s)

Heres another

1963c-10

03-07-2013 11:15 AM

Re: WTB Blue patina pass fender

4 Attachment(s)

Ok, finally got the last pics to load

All times are GMT -4. The time now is 07:50 AM.