Big block parts and a few small block
 

I have some extra big block stuff that I want to get rid of. Also a few small block parts.

Big Block
New power steering reservoir hose. 1 1/2' enough to do one truck. I bought 3'... picture on page 2. 15.00 shipped.sold
72 alt. brackets (all 3) 75.00 shippedsold
72 engine frame perches, They currently have 73 -up motor mounts that can be removed. For them to work some drilling on either will need done. I was going to find the correct ones and clams. If you want the 73-up mounts on them I will throw in 1 clam. Its all I got. 125.00 shipped. (just the engine perches 100 shipped.sold)
power steering setup- includes brackets,new pump without tank, pump w/tank and bent pulley, reservoir and hose 125.00 shippedsold
Valve Covers-40.00shippedsold
pulleys-2 groove crank and ps single groove for crank- 3925525BR & 3874414BO -45.00 shippedsold
starter heat shield-45.00 shippedsold
Fuel Pump 20.00shipped

not pictured and would like local pick up- exhaust manifolds,later year that has the smog outlets. 50.00
manifold pipes about 2 1/2' long. O2 ports 25.00
fan w/clutch 35.00


Small block stuff - MAKE OFFER
73-up perches,only one clamshell-45.00 shipped
motor lift points- 15.00 shipped
bracket, I don't know what its from- 10.00 shipped

Re: Big block parts and a few small block
 

more pics

Re: Big block parts and a few small block
 

I'll get the small block stuff posted tomorrow,

Re: Big block parts and a few small block
 

I'll take the starter heat shield for 45.00 shipped. LMK, payment arrangements.
Thanks Dave.

Re: Big block parts and a few small block
 

pm sent

Re: Big block parts and a few small block
 

Could you do 175 for the power steering set up and the 72 alt brackets?
Posted via Mobile Device

Re: Big block parts and a few small block
 

Any pics of the 2 1/2' long manifold pipes? I guessing these are the down comers pipes off the iron manifolds?

Re: Big block parts and a few small block
 

No can't do that. Shipping to Canada would be a killer

Re: Big block parts and a few small block
 

You are right. I'll get pics tomorrow. They're in the shed.

Re: Big block parts and a few small block
 

I have a usa address you can ship to. Let me know thx
Posted via Mobile Device

Re: Big block parts and a few small block
 

In that case, yes. I'll send a pm.

Re: Big block parts and a few small block
 

I'll take the down comers for 25.00 shipped pending pics.
Thanks Dave.

Re: Big block parts and a few small block
 

Those aren't pictured and for local pick up. I can probably ship them for 15.00

Re: Big block parts and a few small block
 

Ok, I'll wait for pics. No worriers on shipping. Payment sent for H/S.
Thanks Dave.

Re: Big block parts and a few small block
 

The 72 frame stands been modified or have any damage?

Re: Big block parts and a few small block
 

Any dents on valve covers?
Posted via Mobile Device

Re: Big block parts and a few small block
 

No. Good shape. Just read the description and lmk if you want the 73-up mounts or just the frame perches


I'll look at them closely.

Re: Big block parts and a few small block
 

One has two very small dents. One coming up from the inside and one going down from the outside. Someone tried pushing the latter but didn't do anything I guess. These are very easily worked out. Heres some pics

Re: Big block parts and a few small block
 

I will take the 2 engine stands...

Payment sent.

Re: Big block parts and a few small block
 

Okay, I'll get the mounts off of them and send the stands only. Thanks.

Re: Big block parts and a few small block
 

Dave, Heres pics of the pipes. They look pretty new. They have the triangle clamps too. 40.00 shipped for these.

Re: Big block parts and a few small block
 

Re: Big block parts and a few small block
 

MadnessBigBlock Lmk if you still want the parts. And if so how you'll be making payment. I've sent you two pm's
Posted via Mobile Device

Re: Big block parts and a few small block
 

I will get paypal sent out tonight.
Posted via Mobile Device

Re: Big block parts and a few small block
 

Pipes look new, but may not work for my app, so I think I'll pass.
Thanks Dave.