The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - KS 3-2 setup (https://67-72chevytrucks.com/vboard/showthread.php?t=568014)

Wrenchbender Ret

02-26-2013 12:08 AM

3-2 setup

2 Attachment(s)

I have a 3-2 carb setup for sale. It fits small block Chevy engines up to 86. It has a new Edelbrock manifold. I rebuilt & detailed 3 Rochester 2G carbs. with Eastwood Bronze paint. The center one has a manual choke. I used Speedway shaft & throttle blade kits. I used Offenhouser progressive linkage kit. $1000.
georgec2434@yahoo.com

54belair

02-26-2013 10:14 AM

Re: 3-2 setup

Can this model of carb. be set up with an electric choke?
Have you tried them since rebuild, Is linkage progressive or both end units together?

Wrenchbender Ret

02-26-2013 12:36 PM

Re: 3-2 setup

Quote:

Originally Posted by 54belair (Post 5913773)

Can this model of carb. be set up with an electric choke?
Have you tried them since rebuild, Is linkage progressive or both end units together?

I dont think you can use an electric choke but there is a manifold heated choke carb like these.
The progressive linkage opens the end carbs together at about 2/3 opening of the center carb.
I have never run it.
George

54belair

02-26-2013 04:08 PM

Re: 3-2 setup

Thanks for your answer George, After I asked the questions, I did some research and I believe Id need a 2gc or 2 gv (has the choke assy).
Id like to run three deuces--realized I didnt know enough about them.

All times are GMT -4. The time now is 05:07 PM.