'67 CST Fleetside Tailgate, wheel housings
 

Following parts came with a '67 CST long bed fleet side project. I am using a short bed frame with a 1988 Sport Side bed so will not be needing these parts. Reproduction parts came from "The Truck Shop", Orange, CA. I will try to post additional pictures when the weather improves. More parts listed as I sort them out - side moldings, emblems, pedals, cross sills, etc.

Used tailgate has been blasted & coated to prevent rust - $200.00.
Reproduction inner wheel housings - $75.00 pair.
Reproduction front bed panel for wood floor - $85.00
Repro Left & right lower inner door patch panels - $30.00 pair.
Repro Lower rear fender patch panels - $25.00 pair.
Used driver's side fender - $75.00.
Full wheel covers - $150.00
Buddy Seat (needs covers) frame has been blasted & painted - $700.00.
Used original grill frame - $30.
Original '69 Small block frame mounts - $25.00

Parts are located near Hope Mills, NC.

(910) 308-0130

Re: '67 CST Fleetside Tailgate, wheel housings
 

I meant to add that big block frame mounts have been sold.

Re: '67 CST Fleetside Tailgate, wheel housings
 

How much for the inner door patch panels shipped to 95240?

Re: '67 CST Fleetside Tailgate, wheel housings
 

do you have the CST door emblems and horn button? i will get in line for those pending pics. thanks

Re: '67 CST Fleetside Tailgate, wheel housings
 

Second in line on the badges ;)

Re: '67 CST Fleetside Tailgate, wheel housings
 

How would you rate the tailgates condition? Is it straight? Bowed? rusted through?

Re: '67 CST Fleetside Tailgate, wheel housings
 

It's straight but some pitting & small rust holes - less than pencil tip.

Re: '67 CST Fleetside Tailgate, wheel housings
 

Whats shipping to 23229? Greyhound shipping is an option here too (Richmond, Va) Calculate shipping on the front bed panel too! Thanks

Re: '67 CST Fleetside Tailgate, wheel housings
 

:)

Re: '67 CST Fleetside Tailgate, wheel housings
 

Interested in front panel if it gets to me and fender patches pending shipping to 50702

Re: '67 CST Fleetside Tailgate, wheel housings
 

Are the wheel housings for the box? if so would be also be interested in those pending shipping to 50702. there is a greyhound in waterloo, ia which is 50701 if that turns out to be the cheaper option.

Re: '67 CST Fleetside Tailgate, wheel housings
 

Grill, details and shipping to 48867

Re: '67 CST Fleetside Tailgate, wheel housings
 

Also interested in the grill. Shipping to 93727
Posted via Mobile Device

Re: '67 CST Fleetside Tailgate, wheel housings
 

will you ship?? 33444. Interested in the tailgate.

Reed

Re: '67 CST Fleetside Tailgate, wheel housings
 

Thanks to every one that has responded. Some more pictures & stuff for sale. Door skins - $50.00 for the pair, bed cross sills - $100.00 for the rear & 3 middle ones. I also have some wheels I post in a little while. As soon as I figure out the weights 7 particulars for shipping I will let U know by PM to those who asked 1st. Might take me a day or so as I'm working by myself. Thanks for your patience.

(910) 308-0130

Re: '67 CST Fleetside Tailgate, wheel housings
 

These are 15"X8" with 4 centers & trim rings - $400.00 for all 5. The aluminum are factory wheels that have been polished & have spinners added, they are 15"X7" & 6 lug - $400.00 for them also. Bed is '88 & up - I'm putting one on my '67 CST project. $600.00 for it with tailgate & rails. The rear suspension pieces will put your truck on the frame!! Air bags are Air-Lift. Everything but shocks. This a "Thorson Brothers" kit, I believe. I'll have to look around to find the paper work I got with it. I forget what I paid but will take $600.00 for all. I am slowly going thru the parts I don't need for my project. Thanks again to all for the great response. Any ??'s, please call or respond on this site.

(910) 308-0130

Re: '67 CST Fleetside Tailgate, wheel housings
 

Picture of crack in grill.

Re: '67 CST Fleetside Tailgate, wheel housings
 

The suspension set up in #16 is called "63-72 C10 Rear Wishbone Super Lift System" by Thorbecke Brothers. There are pictures of it in a frame at *************. It sold for $1299.00 w/shocks but without the 3 gallon air tank.

Re: '67 CST Fleetside Tailgate, wheel housings
 

Can i see some pics of the wheel housings?

Re: '67 CST Fleetside Tailgate, wheel housings
 

More pictures -wheel housings, inner rocker ($5), TH400 transmission cross member ($45) & close up of "C" notch & rear suspension.

Re: '67 CST Fleetside Tailgate, wheel housings
 

also interested in the inner rocker.

Re: '67 CST Fleetside Tailgate, wheel housings
 

Would you sale just the spinners and can you show a more detailed photo of them?
Posted via Mobile Device

Re: '67 CST Fleetside Tailgate, wheel housings
 

interested on door skins. any pics of the wheel coverings? also inner rocker and inner door patch panels. prices shipped to 44870 thanks

Re: '67 CST Fleetside Tailgate, wheel housings
 

More pics - spinners, moldings & wheel covers. The mirrors were not on the truck, but in the box. The shipping estimates I have given some of U are UPS based on actual weights (my bathroom scale) and bare measurements without boxing/packing. I noticed they have fuel charges, remote area charges & "nominal" weight charges (much heavier than actual) - pretty expensive to ship west of the Mississippi, West Coast & even North East. Greyhound is cheaper but not always. I can bring some of the parts to Charlotte Auto Fair next month but parts must be paid for in advance & I need to know what day they will be picked up. I will be there from Noon Thursday 'til 3PM Saturday. I can possibly bring small parts to Myrtle Beach next week but no sheet metal as I will be driving my '33 coupe - not much room. Thanks again & I'll keep U posted on shipping charges.

Re: '67 CST Fleetside Tailgate, wheel housings
 

Better pics of tailgate rust holes. I did not get the original 283ci engine but did get some valve covers & the TH400 (already used the TH400). This door is pushed in.